Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>Instructions</strong><br />
BUFALO Rondofix V3.0<br />
5.1.2. Turning-on the main switch<br />
After turning on the main switch the control voltage can be switched on by pressing<br />
the green button [2], though this is possible only if no emergency stop switch has been<br />
operated and the covering over the cutter is closed. Emergency stop switches once<br />
pressed are released by turning them.<br />
The green button [2] lights when the control voltage is switched on.<br />
5.1.3. Switching-on the drives<br />
Upon switching-on the control voltage the motors driving the various subunits are put<br />
into operation automatically.<br />
These drives are switched off automatically after running more than 5 minutes without<br />
load.<br />
The drives are switched on again automatically by operating a button or switch for<br />
manual or automatic operation on the control unit [3].<br />
� 34 <strong>Operating</strong>s <strong>Instructions</strong> Edition 22. November 2007<br />
Bufalo Rondofix V3.0