Operating Instructions, complete - W. Gantenbein GmbH

More documents

Recommendations

Info

Operating Instructions BUFALO Rondofix V3.0 7.5.7. Changing plates for cold and hot glue 1 2 3 4 Fig. 31 Plate changing 1. The rear plate has phases for hot glue [1] and cold glue [2]. It is screwed and pinned and must be unscrewed and turned when changing glues. 2. The front plate [4] has a ledge [3] which must be changed also when changing glue. � 56 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Operating Instructions BUFALO Rondofix V3.0 7.6. Error Messages and their Correction Error messages are displayed with blinking text. The standard procedure is first to correct errors, then reset by pressing "Enter". Exceptions to this rule are described in detail in the following. 7.6.1. Control Voltage miss The following is displayed: Control Voltage miss Possible causes: • The control system was actuated by switching on the main switch. • An emergency cut-off button has been pushed. • The milling cutter cover is open. Correction: • Connect the control system power by pressing the green luminous button. Before doing this, make sure that any emergency buttons which were pressed are unlocked, and that the cover is closed. Exit: • No exit required. 7.6.2. Set V-min The following is displayed: Causes: Set V-min • The control system has not been initialised yet, and the control valve for advance speed is not at minimum. • An emergency cut-off has been pressed. • The advance feed in manual operation only operates when the control valve for advance speed is at minimum. Correction: • Turn the control valve to the advance speed required. Turn the control valve to the advance speed required. Exit: • No exit required. � 57 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Page 1 and 2:
Operating Instructions BUFALO Rondo
Page 3 and 4:
Operating Instructions BUFALO Rondo
Page 5 and 6: Operating Instructions BUFALO Rondo
Page 55: Operating Instructions BUFALO Rondo
Page 87: Operating Instructions BUFALO Rondo
show all

Operating Instructions, complete - W. Gantenbein GmbH

Create successful ePaper yourself

Delete template?

Save as template?