Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> <strong>Instructions</strong><br />
BUFALO Rondofix V3.0<br />
8.3. Maintenance schedule<br />
N<br />
o.<br />
B = operator d = daily<br />
S = service mechanic m = monthly<br />
T = technician<br />
W. <strong>Gantenbein</strong><br />
h = half-yearly<br />
y = yearly<br />
c = customerspecific<br />
Task to be performed d m h y c Remarks<br />
1 Plate adjustment B/S See Section 9<br />
2 Brake check B/S See Section 9<br />
3 Cardan shaft lubrication B/S<br />
4 Lubricate chains B/S<br />
5 Clean away glue and paper B<br />
6 Check dust bag B<br />
7 Tension the gluing station chain S<br />
8 Check hydraulic oil B/S<br />
9 Check vacuum pump S See separate instructions<br />
10 Replace PLC buffer battery S See separate instructions<br />
11 Check functions of safety devices S<br />
8.3.1. Cleaning shafts for gluing rollers<br />
WARNUNG WARNUNG WARNUNG<br />
Depending on the hot glue used the temperature will range up to<br />
200°C. Contact with the glue may cause burns.<br />
Wear gloves or leave the equipment long enough to cool down.<br />
Every time the rollers are changed or the gluing station is cleaned, make sure that the<br />
gluing roller support is greased with Blasolube 304 high-temperature grease after<br />
cleaning.<br />
� 66 <strong>Operating</strong>s <strong>Instructions</strong> Edition 22. November 2007<br />
Bufalo Rondofix V3.0
Change language