Operating Instructions, complete - W. Gantenbein GmbH

More documents

Recommendations

Info

Operating Instructions BUFALO Rondofix V3.0 9.9. Brake adjustment Fig. 43 Adjusting the brake The brake should be adjusted so that no impact noises are heard. The brake is adjusted by tightening the screw [1]. Indication Be careful not to tighten the brake excessively, otherwise the paper grippers will not reach their end positions. � 78 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Operating Instructions BUFALO Rondofix V3.0 9.10. Height adjustment of the gluing unit 1 Fig. 44 Height adjustment right Fig.45 Height adjustment left The height adjustment of the gluing unit can be altered by means of two screws. 1. The screw beside the arrow [1] in Fig. 44 adjusts the height of the right-hand side. 2. The screw beside the arrow in Fig. 45 adjusts the height of the left side. To get at the lefthand height adjustment the casing on the back of the gluing unit must be removed. � 79 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Page 1 and 2:
Operating Instructions BUFALO Rondo
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28: Operating Instructions BUFALO Rondo
Page 77: Operating Instructions BUFALO Rondo
Page 87: Operating Instructions BUFALO Rondo
show all

Operating Instructions, complete - W. Gantenbein GmbH

Create successful ePaper yourself

Delete template?

Save as template?