Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
Operating Instructions, complete - W. Gantenbein GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> <strong>Instructions</strong><br />
BUFALO Rondofix V3.0<br />
7.6.17. Light curtain<br />
The display shows:<br />
• Cause:<br />
Light grating<br />
• The light grating has been interrupted during the feed advance, stopping the feed<br />
at once and causing the above fault message.<br />
Remedy:<br />
Indication<br />
Place material in the book inset only if the green lamp above the book<br />
inset is lit. In manual operation do not reach into the book inset zone<br />
during the feed movement. Do not place material in this zone.<br />
• Take hands or material out of the light grating range.<br />
• Acknowledgement:<br />
• Press «Enter»-key on terminal, then throttle feed speed to the minimum and start<br />
procedure anew.<br />
7.6.18. Safety ejection<br />
The display shows:<br />
Cause:<br />
Safety ejection<br />
• The cover over the ejection has been opened.<br />
Remedy:<br />
• Close the cover again.<br />
Indication<br />
No acknowledgement is necessary, but in manual operation the feed<br />
speed must be throttled down to minimum before ending the feed<br />
movement, otherwise the fault "Adjust minimum feed" will be displayed<br />
and the feed will not function.<br />
� 63 <strong>Operating</strong>s <strong>Instructions</strong> Edition 22. November 2007<br />
Bufalo Rondofix V3.0