Operating Instructions, complete - W. Gantenbein GmbH

More documents

Recommendations

Info

Operating Instructions BUFALO Rondofix V3.0 8.3. Maintenance schedule N o. B = operator d = daily S = service mechanic m = monthly T = technician W. Gantenbein h = half-yearly y = yearly c = customerspecific Task to be performed d m h y c Remarks 1 Plate adjustment B/S See Section 9 2 Brake check B/S See Section 9 3 Cardan shaft lubrication B/S 4 Lubricate chains B/S 5 Clean away glue and paper B 6 Check dust bag B 7 Tension the gluing station chain S 8 Check hydraulic oil B/S 9 Check vacuum pump S See separate instructions 10 Replace PLC buffer battery S See separate instructions 11 Check functions of safety devices S 8.3.1. Cleaning shafts for gluing rollers WARNUNG WARNUNG WARNUNG Depending on the hot glue used the temperature will range up to 200°C. Contact with the glue may cause burns. Wear gloves or leave the equipment long enough to cool down. Every time the rollers are changed or the gluing station is cleaned, make sure that the gluing roller support is greased with Blasolube 304 high-temperature grease after cleaning. � 66 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Operating Instructions BUFALO Rondofix V3.0 8.3.2. Lubricating the Cardan shaft The Cardan shaft is mounted underneath the casing of the pressing station. Its joints should be lubricated monthly at least. � 67 Operatings Instructions Edition 22. November 2007 Bufalo Rondofix V3.0
Page 1 and 2:
Operating Instructions BUFALO Rondo
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16: Operating Instructions BUFALO Rondo
Page 65: Operating Instructions BUFALO Rondo
Page 87: Operating Instructions BUFALO Rondo
show all

Operating Instructions, complete - W. Gantenbein GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?