VIRTUAL VEHICLE Geschäftsbericht 2009

Publikationen
Denger, A., Stocker, A., Maletz, M.: Zur Relevanz von Enterprise
2.0 und Product Lifecyle Management (PLM) in der
Automobilindustrie. In: Workshop-Proceedings der Tagung
Mensch & Computer 2011, Mensch & Computer 2011, Chemnitz,
2011-09-10, Universitätsverlag Chemnitz, 2011, S. 91-98
- ISBN 978-3-8007-3327-9
Hofer, A., Kitanoski, F.: Energy efficient model predictive
control of a cooling system. In: International Journal Automation
Austria (IJAA), 2011, IFAC (Ed.), 2011, p. 49-61 - ISSN
1562-2703
Englmayer, M., Wimmer, A., Pirker, G., Pemp, B., Hirschl,
G.: Simulation based development of combustion concepts
for large diesel engines. In: ASME 2011 Internal Combustion
Engine Division Fall Technical Conference (ICEF 2011), Morgantown,
2011-10-02/05, ASME (Ed.), 2011, p. 75-83 - ISBN
978-0-7918-4442-7
Wang, X., Steiner, A., Fiala, J.: Linear parameter-varying
modeling of electric vehicle air conditioning system. In: Applied
Mechanics and Materials, 2011 Internat. Conference on
Mechanical Engineering, Materials + Applied Mechanics and
Materials, Dalian, 2011-10-19, Trans Tech Publications, 2011,
p. 318-325 - ISSN 1662-7482
Rauch, Ch.: Uncertainty and local sensitivity analysis of view
factors for transient conjugate heat transfer problems. In:
42nd AIAA Thermophysics Conference, Honolulu, 2011-06-
27, AIAA (Ed.), 2011, p. 1-14 - ISBN 9781618391711
Rejlek, J., Priebsch, H.-H.: On the use of the wave based
technique for a three-dimensional noise radiation analysis of
coupled vibro-acoustic problems. In: SAE Noise and Vibration
Conference and Exhibition 2011, Grand Rapids, 2011-05-16,
SAE (Ed.), 2011, SAE Paper No. 2011-01-1713 - ISSN 0148-
7191
Mader, R., Grießnig, G., Leitner, A., Kreiner, Ch., Bourrouilh,
Q., Armengaud, E., Steger, Ch., Weiß, R.: A computer-aided
approach to hazard analysis for automotive embedded systems.
In: Engineering of Computer Based Systems, 18th IEEE
International Conference and Workshops on Engineering of
Computer-Based Systems (ECBS 2011), Las Vegas, 2011-04-
27, IEEE (Ed.), 2011, p. 169-178 - ISBN 978-1-4577-0065-1
Buchbeiträge
Stolz, M., Knauder, B., Micek, P., Ebner, W., Ebner, P., Korsunsky,
E.: Unifying Approach to Hybrid Control Software. In:
Advanced Microsystems for Automotive Applications 2011:
Smart Systems for Electric, Safe und Networked Mobility.
Hrsg.: Meyer Gereon, Valldorf, Jürgen, Heidelberg/Berlin:
Springer Verlag (2011), S. 69-78 - ISBN 978-3-642-21380-9
66
Neumayer, M.; Zangl, H.; Watzenig, D.; Fuchs, A.: Current
Reconstruction Algorithms in Electrical Capacitance Tomography.
In: New Developments and Applications in Sensing
Technology (Lecture Notes in Electrical Engineering). Hrsg.:
Mukhopadhyay Subhas C., Lay-Ekuakille Aimé, Fuchs Anton,
Bd. 83. Heidelberg/Berlin: Springer Verlag (2011), S. 65-106 -
ISBN 978-0-7695-4488-5
Armengaud, E.; Tengg, A.; Driussi, M.; Karner, M.: Automotive
embedded systems: the migration challenges to a time-triggered
paradigm. In: Solution on Embedded Systems. Hrsg.:
Conti Massimo, Orcioni Simone, Martinez Madrid Natividad,
Seepold Ralf E.D., Bd. 81. Heidelberg/Berin: Springer Verlag
(2011), S. 155-171 – ISBN: 978-94-007-0637-8
Mukhopadhyay, S.C., Lay-Ekuakille, A., Fuchs, A. (Ed.):
New Developments and Applications in Sensing Technology
(Lecture Notes in Electrical Engineering), Heidelberg/Berlin:
Springer Verlag (2011) – ISBN: 978-94-007-0637-8
Vorträge
Prüggler, A., Huber, Ph.; Rieser, A., Steiner, K.Eichberger, A.,
Kirschbichler, S.: Anwendungsorientierte Modellierungsansätze
zur Implementierung relativen Insassenverhaltens in ein
numerisches Menschmodel, 8. VDI Tagung mit Fachausstellung.
Berlin, 2011-10-06
Litter, St., Dietz, St., Lion, A., Mladek, V.: Integration of flexible
structure in multibody systems: Reliable model generation
and automated modeselection, SIMPACK User Meeting 2011.
Salzburg, 2011-05-19
Möller, S., Langmayr, D., Brenn, G., Krieg, P.: Optimierung einer
Sandungsanlage für Straßenbahnen mithilfe numerischer
Simulation der Sand-Luft-Zweiphasenströmung, ANSYS Conference
& CADFEM Austria Users‘ Meeting. Wien, 2011-04-07
Lieschnegg, M., Lechner, B.: Autonome und miniaturisierte
drahtlose Messdatenerfassung mit integrierter Sensorik, 2.
Tagung „Innovation Messtechnik“. Wien, 2011-05-10
Rauch, Ch.: Local uncertainty analysis for steady-state conjugate
heat transfer problems in RadTherm, 7th International
RadTherm User Group Meeting. München, 2011-03-15
Heubrandtner, Th., Trattnig, G., Melekusch, B, Fellner, B.:
Calculation of spot weld failure based on the Hybrid Tefftz
Method, PMA-Crash Forum 2011. Aschaffenburg, 2011-05-25
Steiner, A.: Hocheffizientes Kühl- und Heizsystem basierend
auf dem umweltfreundlichen Kältemittel CO2, Fachgespräche
„Effiziente Autoklimaanlagen - Transparenz schaffen und Systeme
optimieren“. Berlin, 2011-05-31
Six, K., Rosenberger, M., Marte, Ch., Trummer, G.: Rad-
Schiene Interaktion - Schadensbilder und Aspekte ihrer
Entstehung, 40. Tagung Moderne Schienenfahrzeuge. Graz,
2011-09-11
Denger, A., Zoier, M., Zingel, Ch.: Funktionale Entwicklung
und Optimierung komplexer Systeme in 2020, 2. Workshop
„Modellbasierte Kalibriermethoden“. Wien, 2011-09-24
Wimmer, P., Eichberger, A., Rieser, A., Watzenig, D.: Validation
of integrated vehicle safty via an independent co-simulation
environment, Vehicle Property Validation 2011. Bad
Nauheim, 2011-09-07
Marte, Ch., Trummer, G., Six, K., Dietmaier, P., Kienberger, A.,
Stock, R., Fischmeister, E., Oberhauser, A., Rosenberger, M.:
Application of a new wheel-rail contact model to wear simulations
- validation with wear measurements, 22nd International
Symposium on Dynamics on Vehiles on Roads and Tracks -
IAVSD 2011. Manchester, 2011-08-18
Marte, Ch., Trummer, G., Six, K.: Wear & RCF phenomena
in metro operation, voestalpine Charmec-Meeting. Göteborg,
2011-05-26
Geiger, N., Litter, St., Ille, Th., Schittenhelm, M., Hirschberg,
W., Lion, A.: New methods for chassis modeling of commercial
vehicles and application for dynamics and durability simulation,
chassis.tech plus 2011, 2nd International Munich Chassis
Symposium. München, 2011-06-08
Luber, B.: Gleislagecharakterisierung - Methoden zur Analyse
der Fahrzeug/Fahrweg-Interaktion, 2. Task Force „F&E
Synergiepotenziale im Schienen- und Straßenverkehr“. Wien,
2011-05-30
Müller, G., Geiger, N., Hirschberg, W., Ille, Th., Zander, R.:
Leaf spring modeling in SIMPACK: A new approach to modeldiversity,
SIMPACK User Meeting 2011. Salzburg, 2011-05-19
Huber, Ph.: Biomechanics & vehicle safety, International
STRONGnet Summer School. Bielefeld, 2011-06-14
Watzenig, D.: Multi-disciplinary design of alternative drivetrains
– an integrated approach for simulation and validation,
ECO-MOBILITY 2011. Wien, 2011-11-15
Priestner, Ch., Allmaier, H., Reich, F., Priebsch, H.-H., Novotny-Farkas,
F.: Energy efficiency improvements in large stationary
gas engines through optimization of oil rheology supported
by close-to-practice simulation methods, STLE 66th
Annual Meeting and Exhibition. Atlanta, 2011-05-16
Priestner, Ch., Allmaier, H., Priebsch, H.-H., Reich, F., Forstner,
C., Novotny-Farkas, F.: Accurate and reliable friction prediction
in journal bearings: A validated approach, AVL AST
User Conference 2011. Graz, 2011-06-28
Priestner, Ch., Allmaier, H., Reich, F., Priebsch, H.-H., Novotny-Farkas,
F.: Energy efficiency improvements in large
stationary gas engines through optimization of oil rheology
supported by close-to-practice simulation methods, ECOTRIB
2011. Wien, 2011-06-06
Rejlek, J.: Wave based technique for a three-dimensional
steady-state analysis of unbounded acoustic problems, Mid-
Frequency Energy Analysis Workshop. Thurnau, 2011-05-02
Rejlek, J.: Wave based method for 3D unbounded problems,
Mid-Frequency Analysis of Noise and Vibration, Professional
Development Course and Industrial Workshop. Oxford, 2011-
04-05