Hardware Description and Reference for Avaya ... - Avaya Support

G600 Media Gateway
G600 Media Gateway
The Avaya G600 Media Gateway is supported by the current release of Avaya Communication
Manager, but it is no longer available for new installations. The G600 Media Gateway can be
used in an upgraded system with an S8700-series or S8500 Media Server or in a system that
migrates to the S8700-series or S8500 Media Server.
Detailed description
The G600 Media Gateway has the following characteristics:
Note: You
● There is a maximum of 64 port networks when used with the S8700-series and the S8500.
● A maximum of four G600 Media Gateways can be in each Port Network (PN) with the
S8700-series and S8500 media servers. The four G600 Media Gateways must be in one
data rack due to TDM cable length.
● A PN consists of a control G600 Media Gateway that is designated A, and second, third,
and fourth optional G600 Media Gateways that are designated as B, C, and D,
respectively. The DIP switch on the backplane sets the cabinet address ID within the PN.
● 19 inches (48.3 centimeters) wide, 13 inches (33 centimeters) high, and 21 inches (53.3
centimeters) deep
● A weight of 40 pounds to 50 pounds (18 to 22.5 kilograms)
● A choice of floor mounting or rack mounting
Note:
cannot stack the floor mounted version of the G600 Media Gateway.
● Ten universal slots and one power-supply slot
● AC-powered only
There are no internal batteries, and internal DC power is not an option. However, a UPS is
supported.
● Circuit packs that are inserted and removed from the front of the cabinet.
● Cabinet I/O is through the back and through a front cable pass-through slot on the right
See the following figure for an example of the G600 Media Gateway.
Issue 6 February 2007 169