Hardware Description and Reference for Avaya ... - Avaya Support

Avaya Wireless Solutions
● Fixed ports and buttons, including:
- Port LEDs for each Ethernet port
- 11additional system function LEDs
- Left and right LED select buttons.
The following customer-supplied equipment is also required:
● An SFP GBIC (Small Form Factor Pluggable Gigabit Interface Converter), using LC or
MT-RJ fiber cables or RJ copper cables, depending on the GBIC type.
● APC (Advanced Power Conversion PLC) Front End AC-DC Power Shelf
● One APC 800W PSUs
● 2 Power cables (20AWG or thicker) to connect the APC Power Shelf to W310 switches.
Cables must have terminals suitable for M3.5 screws
Voice-Enabled Wireless Local Area Network (WLAN)
Infrastructure
The Avaya infrastructure centralizes much of the WLAN intelligence in a gateway platform. This
provides better integration into the enterprise network and solves the problems that plague
wireless today:
● Management: Reduces deployment complexities / management
● Security: Increases security by maintaining a single entry point
Superior infrastructure for Voice over IP (VoIP)
● Supports subnet and Virtual Local Area Network (VLAN) roaming for better inbuilding
mobility and higher voice quality
● Low-cost Avaya W110 LAPs (Light Access Points) enable dense deployments required for
in-building mobility
Investment Protection
● New features can be centrally stored for easy W110 upgrades
370 Hardware Description and Reference for Avaya Communication Manager