Hardware Description and Reference for Avaya ... - Avaya Support

S8710 Media Server
Note:
Note: For a description of the S8720 Media Server hardware, see S8720 Media
Server on page 68.
The S8710 server’s dimensions are (HxWxD) 3.38 in. (8.6 cm.) x 17.50 in. (44.5 cm.) x 25.75 in.
(65.4 cm.). The S8710 Media Server has a 2U form factor.
Characteristics of the S8710 Media Server include:
● 3.06 GHz P4 processor
SECURITY ALERT: Faxes
● 512 MB memory
● 72GB 10,000 RPM SCSI hard disk drive
● 2 10/100/1000 Ethernet ports on the motherboard to support IPSI network control links,
services access, and administration
● Two USB ports, one of which you use for a modem connection and the other to connect
the Compact Flash drive
● External (USB) Compact Flash
● 4-port (10/100BaseT) network interface card (quad NIC)
● A SCSI CD/DVD-ROM
● A DAL1 Duplication board for connections to the duplicated server.
A DAL1 board resides in a PCI slot on both the active server and the standby server. The
DAL1 operates in either active or standby mode to match the mode of its server. The active
server saves data to its DAL1 board. Then, the data is also sent over the fiber link to the
DAL1 board on the standby server.
● A distance limitation of 10 km between the S8710 Media Servers in the pair
● Support for global power ranges from 100V to 250V AC
● Active/standby status LED for easy in rack server identification
● Supports secure HTTP server for IP phone file downloads.
● Transport, using Communication Manager and an appropriate media processor (T2302AP
or TN2602AP), of the following messages:
- Fax, Teletypewriter device (TTY), and modem calls using pass-through mode
- Fax, V.32 modem, and TTY calls using proprietary relay mode
! SECURITY ALERT:
sent to non-Avaya endpoints cannot be encrypted.
72 Hardware Description and Reference for Avaya Communication Manager