Hardware Description and Reference for Avaya ... - Avaya Support

Avaya Wireless Solutions
W310 WLAN Gateway
The W310 WLAN Gateway, using Light Access Points, provides a standards-based
infrastructure and a new solution for wireless applications. The W310 Mobility Gateway
provides a rich feature set in the security, mobility and management area and also provides a
lower overall cost of ownership for medium/large enterprise or a hotspot service provider.
Instead of adding functionality to the Access Point, the W310 serves as a WLAN Gateway that
centralizes the Access Point features, while the Access Points are reduced to simpler, cheaper
devices, responsible for only basic functions.
Note: The
CAUTION: The
Note:
W310 WLAN Gateway also supports AP600 (an AP-4, AP-5, or AP-6 that
has been upgraded for Light AP support) access points if the access points have
the most recent firmware.
! CAUTION:
W310 WLAN Gateway provides wireless mobility service totally independent
of Communication Manager and the media servers that support Communication
Manager. The W310 WLAN Gateway has no interactions with Communication
Manager-based systems. For wireless applications that use Communication
Manager for call-handling, see W310 WLAN Gateway for Seamless
Communications on page 373 or Extension to Cellular and Off-PBX Station on
page 376.
Figure 73: W310 WLAN Gateway
The chassis features:
● 16 10/100BaseT Ethernet ports (ports 1 through 16), connected with Category 5 copper
cable with RJ-45 termination for 100Base-T ports. Use all eight wires in the cable. The
maximum copper cable length connected to a 10/100Base-T port is 100m (328 ft.)
● Two SFP GBIC Gigabit copper or fiber ports
● A console port.
Issue 6 February 2007 369