Hardware Description and Reference for Avaya ... - Avaya Support

Components
Required circuit packs
The G650 Media Gateway requires the following circuit pack:
Avaya G650 Media Gateway
● 655A power supply on page 215
If the G650 Media Gateway or G650 stack is connected as a port network (PN) to the
S8700-series or S8500 Media Server for the control network, the following circuit pack is also
required in the PN:
● TN2312BP IP server interface on page 258
If the G650 PN is connected by fiber to other PNs, one of the following circuit pack types is
required:
● TN570D Expansion Interface on page 225 for direct-connect or CSS-connect PNs
● TN2305B ATM-CES trunk/port-network interface for multimode fiber on page 257 or
TN2306B ATM-CES trunk/port-network interface for single-mode fiber on page 257 for
ATM-connect PNs.
If the G650 PN uses the IP-PNC method for connections to other PNs, connects to branch
location media gateways in the network, supports IP endpoints, or serves as a gateway
between fiber-PNC PNs and IP-PNC PNs in the PN configuration, the following circuit packs are
required:
● TN2302AP IP media processor on page 256 or TN2602AP IP Media Resource 320 on
page 267
If the G650 PN connects to branch location media gateways or adjuncts in the network,
supports IP endpoints, or uses IP trunks, the following circuit pack is also required:
● TN799DP control LAN (C-LAN) interface on page 244
For each physical location of a PN or group of PNs, the following circuit pack is also required:
● TN771DP maintenance and test on page 236
Optional circuit packs
Additional circuit packs can be used with the G650 Media Gateway. Their use depends on
which media server is using the G650 Media Gateway, the S8500 Media Server or the
S8700-series Media Server. See Appendix B: Optional components for media servers on
page 421.
Issue 6 February 2007 179