Hardware Description and Reference for Avaya ... - Avaya Support

Compatibility
TN8412AP S8400 server IP interface
The TN8412AP SIPI also supports an S8400 Media Server in the following gateways:
● CMC1
● G600
However, the SIPI does not provide environmental maintenance for these media gateways.
Environment maintenance requires monitoring of the AuxSig backplane lead cabinet when the
TN2312BP is installed in a CMC1 or G600 media gateway with Communication Manager 2.0.
This lead sends an alarm if a failure is detected in either the power supply or fan assembly. The
CMC1 and G600 are supported only in a nondedicated control path configuration with
Communication Manager 2.0.
See the following table for the location of the TN8400AP and TN8412 SIPI in different
gateways:
See the following table for SIPI and media gateway compatibility.
Media
Gateway
I/O adapters
Circuit Pack G650 G600 CMC1
TN8400AP Media Server A02 A01 A01
TN8412AP SIPI A01 A02 A02
Communication
Manager 1.x
Communication
Manager 2.0
DEFINITY
R10
Environmental
maintenance
provided by:
SCC1 Yes Yes Yes TN775D
MCC1 Yes Yes Yes TN775D
CMC1 Yes Monitoring the AuxSig
backplane lead
G600 Yes Monitoring the AuxSig
backplane lead
G650 Yes TN8412AP SIPI
The TN8412AP SIPI requires an adapter that provides for the alarm input, CPAD, and
emergency transfer leads. This adapter also allows the SIPI Ethernet connection to be made to
the back of the SIPI slot. The adapter also provides an Ethernet connection to the customer’s
LAN or directly to the S8400 with a crossover cable to port EthA on the S8400.
Issue 6 February 2007 279