Hardware Description and Reference for Avaya ... - Avaya Support

See the following table for power source information.
Chassis style and
power-distribution unit
Avaya G650 Media Gateway
See Table 26: Circuit breakers for AC-powered chassis on page 181 for circuit breaker
information for AC-powered chassis.
Dimensions
● AC or DC power
supply. Apparatus
Code 655A
● A 655A power
supply is required
in slot 0.
● A 655A power
supply is optional
in slot 15.
The G650 Media Gateway has the following dimensions:
● 14h x 22d x 19w (inches)
● 36h x 56d x 48w (centimeters)
● height in rack: 8 U
Power source options Power input receptacles
● Single phase 120
VAC with neutral
wire
● Single phase 240
VAC with neutral
wire
● -48VDC
Table 26: Circuit breakers for AC-powered chassis
● 120 VAC, 60 Hz NEMA 5-15R
● 240 VAC, 50 Hz IEC 320
● When you instal G650s in
Japan, use country specific
receptacles for 100 and 200
VAC, 50/60 Hz.
● When you instal G650s in
Mexico, use country specific
receptacles for 127 VAC.
Chassis type Circuit breaker size
Rack mount chassis (120 VAC) 60 Hz 15 A
Rack mount chassis (240 VAC) 50 Hz 10 A
● weight: 35 - 39 pounds or 16 - 18 kilograms
The G650 requires 12 inches, or 30 centimeters, of clearance in the rear and 18 inches, or 45
centimeters of clearance in the front. This clearance allows for adequate ventilation and
conforms with standards for the EIA3 10D data rack. In a multiple G650 configuration, the
G650s are placed in a rack without any space between them. If the G650s are not correctly
placed in the rack, the TDM/LAN cables cannot connect them.
Issue 6 February 2007 181