Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

More documents

Recommendations

Info

connecting with other device If not using a Broadband Router For setting , , and , contact your network administrator. 4. In the pane, provide necessary information. • HTTP Port : Used to access the NVR using the Internet browser, defaulted to 80. Use the spin button to change the HTTP Port value. • Port(TCP) : Used to control the video signal transfer, defaulted to 554. 5. Enter the password. This is the login password for the “admin” user who accesses the NVR. The default password is “4321”. J ` The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. ` Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 6. Click [OK]. Manual network setup will be completed. If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The of the Broadband Router will be the of the NVR. • Gateway : The of the Broadband Router will be the of the NVR. M ` The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router. ` Refer to the “Port Range Forward (Port Mapping) Setup” section of the Broadband Router’s documentation. (Page 24) Auto Network Setup Run to display the device search list. At the initial startup, both [Auto Set] and [Manual Set] will be grayed out. 1. Select a NVR in the search list. Both the [Auto Set] and [Manual Set] buttons will be activated. 2. Click [Auto Set]. The Auto Setting dialog appears. The , , and will be set automatically. 22_ connecting with other device
3. Enter the password. This is the login password for the “admin” user who accesses the NVR. The default password is “4321”. M ` The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. ` Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 4. Click [OK]. Auto network setup will be completed. Dynamic IP Setup Dynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with NVRs connected, is assigned an IP address by the DHCP server - If connecting the NVR directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1. Run the IP Installer on the user’s local machine to display device allocated with IP addresses in the list. 2. Select a NVRs in the list, and click [Manual Set] to check the IP of the NVR. If you uncheck , you can change IP to . English _23 ● CONNECTING WITH OTHER DEVICE
Page 1 and 2: NETWORK VIDEO RECORDER User Manual
Page 3 and 4: overview IMPORTANT SAFETY INSTRUCTI
Page 5 and 6: System Shutdown Turning off the pow
Page 7 and 8: SEARCH VIEWER 46 46 MENU SETUP 50 5
Page 9 and 10: Package Contents Please unwrap the
Page 11 and 12: PART NAMES AND FUNCTIONS (REAR) Gr
Page 13 and 14: RACK INSTALLATION Install the Brack
Page 15 and 16: 5. When the installation of additio
Page 17 and 18: Connecting the Alarm Input/Output T
Page 19 and 20: Connecting to network through PPPoE
Page 21: Protocol URL Item Description Netw
Page 25 and 26: starting web viewer WHAT IS WEB VIE
Page 27 and 28: CONNECTING WEB VIEWER 1. Open your
Page 29 and 30: Differences on Using the Web Viewer
Page 31 and 32: Checking Direct3D for Normal Operat
Page 33 and 34: Menu Description Capture Saves curr
Page 35 and 36: Video Input Status Error Informatio
Page 37 and 38: Changing Split Mode When clicking t
Page 39 and 40: Switching the split mode You can pl
Page 41 and 42: To capture a screen 1. Click < > bu
Page 43 and 44: To set a preset 1. Click < > button
Page 45 and 46: Live Status Select from the live s
Page 47 and 48: Item Description Overlapping Data D
Page 49 and 50: Item Description Stop Stops playing
Page 51 and 52: SYSTEM SETUP You can setup Date/Tim
Page 53 and 54: • ID : Change the admin ID. • P
Page 55 and 56: Setting the users You can add a use
Page 57 and 58: System Manage You can confirm the v
Page 59 and 60: • Export : Exports NVR settings t
Page 61 and 62: • Connection : Display the connec
Page 63 and 64: • IP : Provide the IP address of
Page 65 and 66: Camera Setting You can change the v
Page 67 and 68: • No. : Shows the assigned number
Page 69 and 70: SETTING THE RECORDING You can setup
Page 71 and 72: • Full Frame : Shows the amount o
Page 73 and 74:
SETTING THE EVENT You can configure
Page 75 and 76:
Video loss detection You can set th
Page 77 and 78:
Setting the Network Connection with
Page 79 and 80:
Setting Port • Protocol Type : Se
Page 81 and 82:
DDNS Setting DDNS is a short form o
Page 83 and 84:
Live Streaming You can configure th
Page 85 and 86:
Group Setting You can set the group
Page 87 and 88:
Network Item Details Interface RJ-4
Page 89 and 90:
PRODUCT OVERVIEW unit : mm (inches)
Page 91 and 92:
Category Details Factory Default Ev
Page 93 and 94:
TROUBLESHOOTING Problem Action The
Page 95 and 96:
Problem Action Frame rate of the ac
Page 97 and 98:
1. You may copy and distribute verb
Page 99 and 100:
TERMS AND CONDITIONS 0. Definitions
Page 101 and 102:
All other non-permissive additional
Page 103 and 104:
We call this license the “Lesser
Page 105 and 106:
14. If you wish to incorporate part
Page 107:
The copyright notices in the Softwa
Page 116:
SALES NETWORK SAMSUNG TECHWIN CO.,
show all

Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

Create successful ePaper yourself

Delete template?

Save as template?