Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

More documents

Recommendations

Info

menu setup Event Record Duration You can set the beginning and ending point of a recording on an event. • Pre Event : The recording of an event will start at a pre-determined time prior to the actual occurrence of the event. If it is set to 5 seconds, the recording begins from 5 seconds before the event. • POST Event : The recording will continue for a pre-determined time after the actual end of an event. If it is set to 5 seconds, the recording ends in 5 seconds after an event. M 70_ menu setup ` If the video resolution is larger than 4CIF, recording may not proceed as much as the pre-event recording time. The greater the video data size is, the maximum pre-event recording time will be reduced in inverse proportion. Record Setting You can set resolution, <strong>IP</strong>S, and quality of recordings by channel, and by recording type of standard / event. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, and set the transfer limit for recordings. Setting NVR Recording • Standard, Event : Configures Standard recording and Event recording. - Full Frame : Records all frames fed by the camera. - Key Frame : Records only key frames fed by the camera. Actual recording rate may differ from camera settings. In general, 1 to 2 frames per second are recorded. - OFF : No recording is made.
• Full Frame : Shows the amount of received data for full frame recording. • Key Frame : Shows the amount of received data for key frame recording. • Bitrate Limit : Shows allowed maximum limit of data bitrate, per channel. • Audio : Specify whether to record the sound received from the camera or not. • : Displays corresponding recording status of each channel. • : Updates corresponding recording settings of each channel. M ` If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to recording even when the channel is configured to recording mode. For Key Frame recording channels, the icon for limited recording appears on the live screen's top side. Press the < > button to make icon of limited recording disappear. If the transferred data exceeds the limit again, it will reappear. ` If a channel name is displayed in yellow, the camera profile of the channel is replaced with one other than assigned due to problem. Check the channel information to see the applied profile to the channel listed in yellow. Setting the network camera’s recording profile You can configure the video profile settings for instructing the network camera (connected to each channel) to make recording. M ` You can configure the settings only for the profiles that are supported by the camera. ` If the profiles used for recording and network are different, camera’s video feed may not comply with the frame rate as specified in the camera. • Profile : Select a record profile for the connected camera. • Codec : Show the codec information for the selected record profile. • Resolution : Display the resolution for the selected record profile. • Send Rate : Display the baud rate for the selected record profile. • Quality : Display the video quality for the selected record profile. English _71 ● MENU SETUP
Page 1 and 2:
NETWORK VIDEO RECORDER User Manual
Page 3 and 4:
overview IMPORTANT SAFETY INSTRUCTI
Page 5 and 6:
System Shutdown Turning off the pow
Page 7 and 8:
SEARCH VIEWER 46 46 MENU SETUP 50 5
Page 9 and 10:
Package Contents Please unwrap the
Page 11 and 12:
PART NAMES AND FUNCTIONS (REAR) Gr
Page 13 and 14:
RACK INSTALLATION Install the Brack
Page 15 and 16:
5. When the installation of additio
Page 17 and 18:
Connecting the Alarm Input/Output T
Page 19 and 20: Connecting to network through PPPoE
Page 21 and 22: Protocol URL Item Description Netw
Page 23 and 24: 3. Enter the password. This is the
Page 25 and 26: starting web viewer WHAT IS WEB VIE
Page 27 and 28: CONNECTING WEB VIEWER 1. Open your
Page 29 and 30: Differences on Using the Web Viewer
Page 31 and 32: Checking Direct3D for Normal Operat
Page 33 and 34: Menu Description Capture Saves curr
Page 35 and 36: Video Input Status Error Informatio
Page 37 and 38: Changing Split Mode When clicking t
Page 39 and 40: Switching the split mode You can pl
Page 41 and 42: To capture a screen 1. Click < > bu
Page 43 and 44: To set a preset 1. Click < > button
Page 45 and 46: Live Status Select from the live s
Page 47 and 48: Item Description Overlapping Data D
Page 49 and 50: Item Description Stop Stops playing
Page 51 and 52: SYSTEM SETUP You can setup Date/Tim
Page 53 and 54: • ID : Change the admin ID. • P
Page 55 and 56: Setting the users You can add a use
Page 57 and 58: System Manage You can confirm the v
Page 59 and 60: • Export : Exports NVR settings t
Page 61 and 62: • Connection : Display the connec
Page 63 and 64: • IP : Provide the IP address of
Page 65 and 66: Camera Setting You can change the v
Page 67 and 68: • No. : Shows the assigned number
Page 69: SETTING THE RECORDING You can setup
Page 73 and 74: SETTING THE EVENT You can configure
Page 75 and 76: Video loss detection You can set th
Page 77 and 78: Setting the Network Connection with
Page 79 and 80: Setting Port • Protocol Type : Se
Page 81 and 82: DDNS Setting DDNS is a short form o
Page 83 and 84: Live Streaming You can configure th
Page 85 and 86: Group Setting You can set the group
Page 87 and 88: Network Item Details Interface RJ-4
Page 89 and 90: PRODUCT OVERVIEW unit : mm (inches)
Page 91 and 92: Category Details Factory Default Ev
Page 93 and 94: TROUBLESHOOTING Problem Action The
Page 95 and 96: Problem Action Frame rate of the ac
Page 97 and 98: 1. You may copy and distribute verb
Page 99 and 100: TERMS AND CONDITIONS 0. Definitions
Page 101 and 102: All other non-permissive additional
Page 103 and 104: We call this license the “Lesser
Page 105 and 106: 14. If you wish to incorporate part
Page 107: The copyright notices in the Softwa
Page 116: SALES NETWORK SAMSUNG TECHWIN CO.,
show all

Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

Create successful ePaper yourself

Delete template?

Save as template?