Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
menu setup<br />
To upgrade the current software version<br />
1. Prepare the software to upgrade.<br />
` In case of server upgrade, NVR must be currently connected to the server in the network.<br />
When a new firmware is available in the network, the corresponding icon appears to notify the update. (Page 34)<br />
` If connected through a proxy server, it may not be upgradable due to limited access.<br />
2. Select the in window.<br />
3. Select the .<br />
4. Select the prepared software and press OK.<br />
` You can execute function only when the of is higher than the <br />
of .<br />
5. The screen changes according to each phase of upgrade.<br />
6. The system restarts automatically after completing the upgrade.<br />
Do not turn off the system power or disconnect the network until it is fully rebooted.<br />
M<br />
58_ menu setup<br />
` Try again from step 3 when “Fail” window prompts.<br />
Contact your service center if you fail continuously.<br />
Settings<br />
You can copy and import the NVR settings by using a storage media.
Change language