Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

More documents

Recommendations

Info

menu setup NETWORK CONFIGURATION It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with events. You can configure the network environment which enables such functions. Interface You can set the network connection route and protocol. Network1/Network2 connection settings Sets the protocol and environment of the network. • IP Type : Sets the network connection mode. • Network1 / Network2 Transfer Bandwidth : Enter the maximum amount of upload data bandwidth for each network. Check the assigned setting in Connection Mode before entering your value. The maximum amount of network retransmission is limited to 64MB for both network1 and 2. Network1 is set to use maximum bandwidth by default. M 76_ menu setup ` Even though Network1 and Network2 are assigned with IP addresses from the same range, only the Network1 becomes accessible if they are connected to physically different networks. ` Even when only one Ethernet port of Network1 and Network2 is connected to the network, both Network1 and 2 become accessible if they are assigned with Static IP addresses in the same range. • IP Address, Subnet Mask, Gateway and DNS - For : You can directly input IP address, Gateway, Subnet Mask and DNS. - For : IP address, Gateway, and Subnet Mask are set automatically. - For : IP address, Gateway, and Subnet Mask are set automatically. • ID, Password : In case you selected PPPoE, provide the "ID" and its "Password". M ` DNS server for and can be set by user only if you selected . ` The data amount received by the Live Viewer is limited to the sum of all distributed data amount per channel, based on the assigned total retransmission data amount. Due to this reason, the actual received video data amount in live mode may be less than data transmission amount specified in settings. To make the video look more smoothly, you can increase data traffic with bitrate setting and watch the video in a single screen mode or in a split screen mode of a smaller number of channels.
Setting the Network Connection without Router • Static - Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the NVR and remote user. - NVR Network Settings : Set the in menu of the connected NVR to . ` Consult your network manager for IP, Gateway and Subnet Mask. • DHCP - Internet connection : Connect the NVR directly to a cable modem, DHCP ADSL modem or FTTH network. - NVR Network Settings : Set the in menu of the connected NVR to . ` If IP is not assigned within 1 minute, it is set to the previous static IP. • PPPoE - Internet connection : An PPPoE modem is directly connected to the NVR, where the PPPoE connection requires user ID and password. - NVR Network Settings : Set the in menu of the connected NVR to . ` PPPoE and should be the same to the PPPoE user information. If you don't know the ID and password, consult your PPPoE service provider. English _77 ● MENU SETUP
Page 1 and 2:
NETWORK VIDEO RECORDER User Manual
Page 3 and 4:
overview IMPORTANT SAFETY INSTRUCTI
Page 5 and 6:
System Shutdown Turning off the pow
Page 7 and 8:
SEARCH VIEWER 46 46 MENU SETUP 50 5
Page 9 and 10:
Package Contents Please unwrap the
Page 11 and 12:
PART NAMES AND FUNCTIONS (REAR) Gr
Page 13 and 14:
RACK INSTALLATION Install the Brack
Page 15 and 16:
5. When the installation of additio
Page 17 and 18:
Connecting the Alarm Input/Output T
Page 19 and 20:
Connecting to network through PPPoE
Page 21 and 22:
Protocol URL Item Description Netw
Page 23 and 24:
3. Enter the password. This is the
Page 25 and 26: starting web viewer WHAT IS WEB VIE
Page 27 and 28: CONNECTING WEB VIEWER 1. Open your
Page 29 and 30: Differences on Using the Web Viewer
Page 31 and 32: Checking Direct3D for Normal Operat
Page 33 and 34: Menu Description Capture Saves curr
Page 35 and 36: Video Input Status Error Informatio
Page 37 and 38: Changing Split Mode When clicking t
Page 39 and 40: Switching the split mode You can pl
Page 41 and 42: To capture a screen 1. Click < > bu
Page 43 and 44: To set a preset 1. Click < > button
Page 45 and 46: Live Status Select from the live s
Page 47 and 48: Item Description Overlapping Data D
Page 49 and 50: Item Description Stop Stops playing
Page 51 and 52: SYSTEM SETUP You can setup Date/Tim
Page 53 and 54: • ID : Change the admin ID. • P
Page 55 and 56: Setting the users You can add a use
Page 57 and 58: System Manage You can confirm the v
Page 59 and 60: • Export : Exports NVR settings t
Page 61 and 62: • Connection : Display the connec
Page 63 and 64: • IP : Provide the IP address of
Page 65 and 66: Camera Setting You can change the v
Page 67 and 68: • No. : Shows the assigned number
Page 69 and 70: SETTING THE RECORDING You can setup
Page 71 and 72: • Full Frame : Shows the amount o
Page 73 and 74: SETTING THE EVENT You can configure
Page 75: Video loss detection You can set th
Page 79 and 80: Setting Port • Protocol Type : Se
Page 81 and 82: DDNS Setting DDNS is a short form o
Page 83 and 84: Live Streaming You can configure th
Page 85 and 86: Group Setting You can set the group
Page 87 and 88: Network Item Details Interface RJ-4
Page 89 and 90: PRODUCT OVERVIEW unit : mm (inches)
Page 91 and 92: Category Details Factory Default Ev
Page 93 and 94: TROUBLESHOOTING Problem Action The
Page 95 and 96: Problem Action Frame rate of the ac
Page 97 and 98: 1. You may copy and distribute verb
Page 99 and 100: TERMS AND CONDITIONS 0. Definitions
Page 101 and 102: All other non-permissive additional
Page 103 and 104: We call this license the “Lesser
Page 105 and 106: 14. If you wish to incorporate part
Page 107: The copyright notices in the Softwa
Page 116: SALES NETWORK SAMSUNG TECHWIN CO.,
show all

Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?