Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

More documents

Recommendations

Info

menu setup Setting the Network Connection Using Router J 78_ menu setup ` To avoid IP address conflict with the NVR's static IP, check followings : • Setting the NVR with a static IP - Internet connection : You can connect the NVR to a router which is connected to an PPPoE/Cable modem or a router in a Local Area Network (LAN) environment. • Setting the NVR Network 1. Set the in menu of the connected NVR to . 2. Check whether the set IP address is in the static IP range provided by the Broadband Router. IP, Subnet Mask and Gateway : Consult your network manager. ` Check whether the set IP address is in the static IP range provided by the Broadband Router. J ` If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should set the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~ 192.168.0.254). 3. Check the Gateway address and subnet mask are equal to those set in the Broadband Router. • Setting the DHCP IP Address of the Broadband Router 1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the Broadband Router and enter the router's address (ex : http://192.168.1.1). 2. At this stage, make the local PC's windows network configurations to the below example : Ex) IP : 192.168.1.2 Subnet Mask : 255.255.255.0 Gateway : 192.168.1.1 M - Once connected to the Broadband Router, it prompts with password. While entering nothing to the User Name field, enter "admin" into the password field and press to access the router configurations. - Access the router's DHCP configuration menu and set its DHCP server activation, and provide the start and end address. Set the start address (192.168.0.100) and end address (192.168.0.200). ` Above steps may differ from the router devices depending on the manufacturer.
Setting Port • Protocol Type : Select the protocol type between TCP and UDP. ` If you select UDP, the items of UDP Port and Unicast/Multicast will be active. ` If set it to TCP, the Device Port item will be active. • Device Port : Enter the connectable port number. Initially, is set. - TCP : It has better stability and lower speed when compared to UDP, and recommended for internet environments. • UDP Port : Initially, is set. It increases / decreases by 160. - UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments. • Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated. - Unicast : Transfers data (UDP, TCP) individually to each connecting client. - Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network. • Multicast IP Address : User can directly input. • Multicast TTL : Select from 0 ~ 255. Initial value for the TTL is set to . • HTTP Port : Enter the port number for the Web Viewer. Initially, it is set to . English _79 ● MENU SETUP
Page 1 and 2:
NETWORK VIDEO RECORDER User Manual
Page 3 and 4:
overview IMPORTANT SAFETY INSTRUCTI
Page 5 and 6:
System Shutdown Turning off the pow
Page 7 and 8:
SEARCH VIEWER 46 46 MENU SETUP 50 5
Page 9 and 10:
Package Contents Please unwrap the
Page 11 and 12:
PART NAMES AND FUNCTIONS (REAR) Gr
Page 13 and 14:
RACK INSTALLATION Install the Brack
Page 15 and 16:
5. When the installation of additio
Page 17 and 18:
Connecting the Alarm Input/Output T
Page 19 and 20:
Connecting to network through PPPoE
Page 21 and 22:
Protocol URL Item Description Netw
Page 23 and 24:
3. Enter the password. This is the
Page 25 and 26:
starting web viewer WHAT IS WEB VIE
Page 27 and 28: CONNECTING WEB VIEWER 1. Open your
Page 29 and 30: Differences on Using the Web Viewer
Page 31 and 32: Checking Direct3D for Normal Operat
Page 33 and 34: Menu Description Capture Saves curr
Page 35 and 36: Video Input Status Error Informatio
Page 37 and 38: Changing Split Mode When clicking t
Page 39 and 40: Switching the split mode You can pl
Page 41 and 42: To capture a screen 1. Click < > bu
Page 43 and 44: To set a preset 1. Click < > button
Page 45 and 46: Live Status Select from the live s
Page 47 and 48: Item Description Overlapping Data D
Page 49 and 50: Item Description Stop Stops playing
Page 51 and 52: SYSTEM SETUP You can setup Date/Tim
Page 53 and 54: • ID : Change the admin ID. • P
Page 55 and 56: Setting the users You can add a use
Page 57 and 58: System Manage You can confirm the v
Page 59 and 60: • Export : Exports NVR settings t
Page 61 and 62: • Connection : Display the connec
Page 63 and 64: • IP : Provide the IP address of
Page 65 and 66: Camera Setting You can change the v
Page 67 and 68: • No. : Shows the assigned number
Page 69 and 70: SETTING THE RECORDING You can setup
Page 71 and 72: • Full Frame : Shows the amount o
Page 73 and 74: SETTING THE EVENT You can configure
Page 75 and 76: Video loss detection You can set th
Page 77: Setting the Network Connection with
Page 81 and 82: DDNS Setting DDNS is a short form o
Page 83 and 84: Live Streaming You can configure th
Page 85 and 86: Group Setting You can set the group
Page 87 and 88: Network Item Details Interface RJ-4
Page 89 and 90: PRODUCT OVERVIEW unit : mm (inches)
Page 91 and 92: Category Details Factory Default Ev
Page 93 and 94: TROUBLESHOOTING Problem Action The
Page 95 and 96: Problem Action Frame rate of the ac
Page 97 and 98: 1. You may copy and distribute verb
Page 99 and 100: TERMS AND CONDITIONS 0. Definitions
Page 101 and 102: All other non-permissive additional
Page 103 and 104: We call this license the “Lesser
Page 105 and 106: 14. If you wish to incorporate part
Page 107: The copyright notices in the Softwa
Page 116: SALES NETWORK SAMSUNG TECHWIN CO.,
show all

Samsung SRN-1000 Network Video Recorder User Manual - Use-IP

Create successful ePaper yourself

Delete template?

Save as template?