Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SETTING THE EVENT<br />
You can configure settings regarding event recordings of sensor, camera event and video loss event.<br />
Sensor Detection<br />
You can set the sensor's operating condition and connected camera, as well as alarm output and its duration.<br />
Setting NVR Sensor Detection<br />
• Sensor Operation : Sets the operation mode of sensors.<br />
- : Sensor is opened. If the sensor is closed, it generates alarm.<br />
- : Sensor is closed. If the sensor is open, it generates alarm.<br />
• Cam : Select a channel to be connected to the sensor.<br />
If selected camera, "Cam Preset setup" window appears.<br />
Select a channel and setup the preset.<br />
` Preset setup can be done in PTZ mode.<br />
• Alarm out : Sets the alarm output method.<br />
` For further information on alarm output, refer to "HDD Alarm Setting". (Page 68)<br />
• Duration : Sets the duration of alarm signal and alarm sound.<br />
English _73<br />
● MENU SETUP