Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
Samsung SRN-1000 Network Video Recorder User Manual - Use-IP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
menu setup<br />
Setting <strong>Network</strong> Camera Sensor Detection<br />
• Sensor Operation : Sets whether to operate the network camera sensor connected to each channel.<br />
• Cam : Select a channel to be connected to the sensor.<br />
If selected camera, "Cam Preset setup" window appears.<br />
Select a channel and setup the preset.<br />
` Preset setup can be done in PTZ mode.<br />
• Alarm out : Sets the alarm output method.<br />
` For further information on alarm output, refer to "HDD Alarm Setting". (Page 68)<br />
• Duration : Sets the duration of alarm signal and alarm sound.<br />
M<br />
74_ menu setup<br />
` If the connected network camera that has configured the alarm in/out settings triggers an alarm, NVR will perform the alarm<br />
out.<br />
Camera Event<br />
You can set whether to react to camera events (motion detection, video analysis, audio events) and alarm<br />
output / time.<br />
• Mode : Select whether to react to camera events or not.<br />
• Alarm Out : Sets the alarm output method.<br />
• Duration : Sets the duration of alarm signal and alarm sound.<br />
M<br />
` The NVR generates alarm output only when the connected network camera is configured to detect events and an actual<br />
event is detected.