1 2 3 4 A - SIPROTEC

Mounting and Commissioning
3.3 Commissioning
418
Message No Meaning see
„par too low:“ 30067 Parameter setting value too small for the indicated address
number
„par too high:“ 30068 Parameter setting value too high for the indicated address
number
„settingFault:“ 30069 Parameter setting implausible for the indicated address number
„Diff Adap.fact.“ 5620 The matching factor of the current transformers for the
differential protection is too great or too small
„Diff err. Set.“ 5623 Differential protection setting not plausible 2.2
REF not avail. 5835 Restricted earth fault protection is not available for the
configured protected object
REF Adap.fact. 5836 The matching factor of the current transformers for restricted
earth fault protection is too great or too small.
REF Err CTstar 5830 There is no single-phase measuring input assigned to the
starpoint current for restricted earth fault protection
2.1.4
2.2
2.1.4
2.1.4
2.3
2.1.4
2.2
„REF err. Set.“ 199.2493 Earth fault differential protection setting not plausible 2.1.1
„REF2 Not avail.“ 205.2491 Restricted earth fault protection 2 is not available for the
configured protected object
„REF2 Adap.fact.“ 205.2494 The matching factor of the current transformers for restricted
earth fault protection 2 is too great or too small.
„REF2 Err CTstar“ 205.2492 There is no single-phase measuring input assigned to the
starpoint current for restricted earth fault protection 2
2.4.1
2.4.1
2.3
2.4.1
2.2
„REF2 err. Set.“ 205.2493 Earth fault differential protection setting not plausible 2.1.1
O/C Ph. not active 1860 Time overcurrent protection for phase currents is not available
for the configured protected object
„O/C Para error“ 023.2493 Settings for time overcurrent protection for phase currents not
plausible
„O/C Ph2 Not av.“ 207.2491 Time overcurrent protection for phase currents 2 is not available
for the configured protected object
„O/C Ph2 err Set“ 207.2493 Settings for time overcurrent protection for phase currents 2 not
plausible
„O/C Ph3 Not av.“ 209.2491 Time overcurrent protection for phase currents 3 is not available
for the configured protected object
„O/C Ph3 err Set“ 209.2493 Settings for time overcurrent protection for phase currents 3 not
plausible
O/C 3I0 not av. 1861 Time overcurrent protection for zero current is not available for
the configured protected object
„O/C 3I0 error“ 191.2493 Settings for time overcurrent protection for zero sequence
current not plausible
„O/C 3I0-2 n/a“ 321.2491 Time overcurrent protection for zero sequence current 2 is not
available for the configured protected object
„O/C3I0-2 errSet“ 321.2493 Settings for time overcurrent protection 2 for zero sequence
current not plausible
„O/C 3I0-3 n/a“ 323.2491 Time overcurrent protection for zero sequence current 3 is not
available for the configured protected object
„O/C3I0-3 errSet“ 323.2493 Settings for time overcurrent protection 3 for zero sequence
current not plausible
O/C 3I0 Err CT 1862 No assignment possible for time overcurrent protection for earth
current
„O/C E error“ 024.2493 Settings for time overcurrent protection for earth current not
plausible
2.1.4
2.4.2
2.1.42.1.6
2.4.2
2.1.42.1.6
2.4.2
2.1.4
2.4.2
2.1.42.1.6
2.4.2
2.1.42.1.6
2.4.2
2.1.4
2.5
Section
SIPROTEC, 7UT6x, Manual
C53000-G1176-C230-2, Release date 06.2012