1 2 3 4 A - SIPROTEC

SIPROTEC, 7UT6x, Manual
C53000-G1176-C230-2, Release date 06.2012
Functions
2.1 General
Address 225 ASSIGNM. 4M,4S appears if 4 assigned measuring locations (address 212) have been selected
for 4 sides (address 213). Only one option is possible:
• M1,M2,M3,M4, i.e. the 4 measuring locations are assigned: M1 to side S1, M2 to side S2, M3 to side S3,
M4 to side S4.
Address 226 ASSIGNM. 5M,2S appears if 5 assigned measuring locations (address 212) have been selected
for 2 sides (address 213). The following options are possible:
• M1+M2+M3,M4+M5, i.e. the 5 measuring locations are assigned: M1 and M2 and M3 to side S1, M4 and M5
to side S2.
• M1+M2,M3+M4+M5, i.e. the 5 measuring locations are assigned: M1 and M2 to side S1, M3 and M4 and M5
to side S2.
• M1+M2+M3+M4,M5, i.e. the 5 measuring locations are assigned: M1 and M2 and M3 and M4 to side S1, M5
to side S2.
• M1,M2+M3+M4+M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 and M3 and M4 and M5
to side S2.
Address 227 ASSIGNM. 5M,3S appears if 5 assigned measuring locations (address 212) have been selected
for 3 sides (address 213). The following options are possible:
• M1+M2,M3+M4,M5, i.e. the 5 measuring locations are assigned: M1 and M2 to side S1, M3 and M4 to side
S2, M5 to side S3.
• M1+M2,M3,M4+M5, i.e. the 5 measuring locations are assigned: M1 and M2 to side S1, M3 to side S2, M4
and M5 to side S3.
• M1,M2+M3,M4+M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 and M3 to side S2, M4
and M5 to side S3.
• M1+M2+M3,M4,M5, i.e. the 5 measuring locations are assigned: M1 and M2 and M3 to side S1, M4 to side
S2, M5 to side S3.
• M1,M2+M3+M4,M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 and M3 and M4 to side
S2, M5 to side S3.
• M1,M2,M3+M4+M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 to side S2, M3 and M4
and M5 to side S3.
Address 228 ASSIGNM. 5M,4S appears if 5 assigned measuring locations (address 212) have been selected
for 4 sides (address 213). The following options are possible:
• M1+M2,M3,M4,M5, i.e. the 5 measuring locations are assigned: M1 and M2 to side S1, M3 to side S2, M4
to side S3, M5 to side S4.
• M1,M2+M3,M4,M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 and M3 to side S2, M4
to side S3, M5 to side S4.
• M1,M2,M3+M4,M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 to side S2, M3 and M4
to side S3, M5 to side S4.
• M1,M2,M3,M4+M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 to side S2, M3 to side
S3, M4 and M5 to side S4.
Address 229 ASSIGNM. 5M,5S appears if 5 assigned measuring locations (address 212) have been selected
for 5 sides (address 213). Only one option is possible:
• M1,M2,M3,M4,M5, i.e. the 5 measuring locations are assigned: M1 to side S1, M2 to side S2, M3 to side
S3, M4 to side S4, M5 to side S5.
57