kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix

Registering using “OPEN”
Preparation: Operate the device to turn on its
Bluetooth function.
1
2
3
4
5
] “BT-PHONE” or “BT-AUDIO”
] “NEW DEVICE” ] “OPEN”
] Enter a PIN (Personal Identification
Number) code in to the unit.
You can enter any number you like
(1-digit to 16-digit number).
[Initial: 0000]
• Some devices have their own PIN
code. Enter the specified PIN code in
to the unit.
Repeat step 3 until you have finished
entering the PIN code.
“OPEN..” flashes.
6 Use the Bluetooth device to search and
connect.
On the device to be connected, enter
the same PIN code you have just
entered for this unit. “CONNECTED”
appears.
Now connection is established and you
can use the device through the unit.
The device remains registered even after you
disconnect the device. Use “CONNECT“ (or
activate “AUTO CNNCT”) to connect the same
device from next time on. ( 16)
Registering using
“SEARCH”/“SPECIAL”
1
2
3
4
5
] “BT-PHONE” or “BT-AUDIO”
] “NEW DEVICE”
] “SEARCH” : To search for available
devices
The unit searches and displays the list
of the available devices. “UNFOUND”
appears if no available device is
detected.
– – – – – or – – – – –
] “SPECIAL” : To connect a special
device
The unit displays the list of the preset
devices.
] Select a device you want to connect.
For available devices...
] Enter the specific PIN code of the
device to the unit.
• Refer to the instructions supplied with
the device to check the PIN code.
Use the Bluetooth device to connect.
Now connection is established and you
can use the device through the unit.
For special device...
Use “OPEN” or “SEARCH” to connect.
ENGLISH
13