kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix

Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available
before activation.
1
2
3
] “XM”
XMDirect Tuner Box or XMDirect2
Tuner System starts updating all the
XM channels. “Channel 1” is tuned in
automatically.
Check your XM Satellite radio ID labelled
on the casing of the XMDirect Tuner
Box or XMDirect2 Tuner System, or tune
in to “Channel 0”. ( right column)
Contact XM Satellite radio on
the internet at to activate your
subscription, or you can call 1-800-XM-
RADIO (1-800-967-2346).
• Once completed, the unit tunes in to
one of the available channels (Channel
4 or higher).
Storing channels in memory
You can preset up to 18 channels for both
SIRIUS and XM.
Ex.: Storing channel into preset number “04.”
1 Tune in to a channel you want to store.
(Steps ~ – !, 18.)
2
3
[Hold]
“PRESET MODE” flashes.
] Select preset number “04.”
“P04” flashes.
Selecting SIRIUS/XM preset
station
1
2
Checking the satellite radio ID
While selecting “SIRIUS” or “XM”...
] Select “Channel 0.”
SIRIUS: SIRIUS identification number is
displayed after “Channel 0” is selected.
XM: The display alternately shows “RADIO ID”
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than “Channel 0.”
Changing the display information
Category name = Channel name
= Artist name = Composer
name * = Song/program name/
title = Clock = (back to the
beginning)
* Only for SIRIUS Satellite radio.
Using the remote controller
5 U / D ∞ : Changes the
categories
2 R / F 3 : Changes the channels
2 R / F 3
[Hold]
: Changes the channels
rapidly
ENGLISH
19