kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix
kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix
kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting<br />
General<br />
FM/AM<br />
Disc playback<br />
36 ENGLISH<br />
Symptom Remedy/Cause<br />
Sound cannot be heard from the<br />
speakers.<br />
“PROTECT” appears on the display<br />
and no operations can be done.<br />
The unit does not work at all. Reset the unit. ( 3)<br />
• Adjust the volume to the optimum level.<br />
• Make sure the unit is not muted/paused ( 6).<br />
• Check the cords and connections.<br />
Check to be sure the terminals of the speaker leads<br />
are covered with insulating tape properly, then<br />
reset the unit ( 3).<br />
If “PROTECT” does not disappear, consult your JVC<br />
car audio dealer or a company supplying kits.<br />
“AUX IN” cannot be selected. Check the = setting.<br />
( 28)<br />
Nothing appear on the display. Check the color settings. ( 30)<br />
SSM automatic presetting does<br />
not work.<br />
Static noise while listening to the<br />
radio.<br />
Store stations manually.<br />
Connect the antenna firmly.<br />
“AM” cannot be selected. Check the = setting. ( 28)<br />
Disc cannot be played back. Insert the disc correctly.<br />
• CD-R/CD-RW cannot be played<br />
back.<br />
• Tracks on the CD-R/CD-RW<br />
cannot be skipped.<br />
Disc can neither be played back<br />
nor ejected.<br />
Disc sound is sometimes<br />
interrupted.<br />
• Insert a finalized CD-R/CD-RW.<br />
• Finalize the CD-R/CD-RW with the component<br />
which you used for recording.<br />
• Unlock the disc. ( 9)<br />
• Eject the disc forcibly. ( 3)<br />
• Stop playback while driving on rough roads.<br />
• Change the disc.<br />
• Check the cords and connections.<br />
“NO DISC” appears on the display. Insert a playable disc into the loading slot.<br />
“PLEASE” and “EJECT“ appear<br />
alternately on the display.<br />
Press 0, then insert a disc correctly.