kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix
kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix
kd-r618 / kd-a615 / kd-r610 instructions - Sonic Electronix
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Menu operations<br />
1 2 3<br />
Repeat step 2 if necessary.<br />
• To return to the previous menu,<br />
press T/P BACK.<br />
• To exit from the menu, press DISP<br />
or MENU.<br />
Category Menu item Selectable setting, [Initial: Underlined]<br />
DEMO<br />
CLOCK<br />
PRO EQ<br />
DISPLAY<br />
[Hold]<br />
DEMO<br />
Display<br />
demonstration<br />
CLOCK SET<br />
Clock setting<br />
24H/12H<br />
Time display<br />
mode<br />
CLOCK ADJ * 1<br />
Clock<br />
adjustment<br />
• DEMO ON<br />
• DEMO OFF<br />
—<br />
[0:00]<br />
• 24 HOUR<br />
• 12 HOUR<br />
: Display demonstration will be activated<br />
automatically if no operation is done for about<br />
20 seconds.<br />
: Cancels. ( 4)<br />
: Adjust the hour, then the minute. ( 4)<br />
: For settings, 4.<br />
• AUTO : The built-in clock is automatically adjusted<br />
using the CT (clock time) data in the Radio Data<br />
System signal.<br />
• OFF<br />
: Cancels.<br />
BASS<br />
MIDDLE<br />
TREBLE<br />
— : For settings, 22.<br />
DIMMER • DIMMER AUTO : Dims the display when you turn on the<br />
headlights. *<br />
• DIMMER ON<br />
• DIMMER OFF<br />
2<br />
: Dims the display and button illumination.<br />
: Cancels.<br />
* 1 Takes effect only when CT (clock time) data is received.<br />
* 2 The illumination control lead connection is required. (See “Installation/Connection Manual.”) This<br />
setting may not work correctly on some vehicles (particularly on those having a control dial for<br />
dimming). In this case, change the setting to any other than .<br />
ENGLISH<br />
23