Polycom DMA 7000 System Operations Guide
Polycom DMA 7000 System Operations Guide
Polycom DMA 7000 System Operations Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>DMA</strong> <strong>Operations</strong> <strong>Guide</strong><br />
MCU Procedures<br />
Note<br />
See the notes in “MCU List” on page 7-1.<br />
To view the MCUs list<br />
Go to Device > MCUs.<br />
The MCUs list appears.<br />
To add an MCU<br />
1 Go to Device > MCUs.<br />
2 In the Commands list, click Add.<br />
3 In the Add MCU dialog box, complete editable fields. All are mandatory.<br />
See “Add MCU Dialog Box” on page 7-3.<br />
4 Click OK.<br />
The new MCU appears in the MCUs list. If the system has a license<br />
available for the MCU, it’s placed into service. Otherwise, it remains out<br />
of service.<br />
To edit an MCU<br />
1 Go to Device > MCUs.<br />
2 In the MCUs list, select the MCU of interest, and in the Commands list,<br />
click Edit.<br />
3 In the Edit MCU dialog box, edit the fields as required. See “Edit MCU<br />
Dialog Box” on page 7-3.<br />
4 Click OK.<br />
The changes you made appear in the MCUs list.<br />
To delete an MCU<br />
1 Go to Device > MCUs.<br />
2 In the MCUs list, select the MCU you want to remove from the <strong>DMA</strong><br />
system’s pool of available conferencing resources.<br />
3 In the Commands list, select Delete.<br />
4 When asked to confirm that you want to delete the selected MCU, click<br />
Yes.<br />
7–4 <strong>Polycom</strong>, Inc.
Change language