Polycom DMA 7000 System Operations Guide
Polycom DMA 7000 System Operations Guide
Polycom DMA 7000 System Operations Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Device Management<br />
To terminate existing calls and conferences on an MCU and stop using it<br />
1 Go to Device > MCUs.<br />
2 In the MCUs list, select the MCU of interest.<br />
3 In the Commands list, select Stop Using.<br />
4 When asked to confirm that you want to stop using the selected MCU,<br />
click Yes.<br />
To stop using an MCU, but allow existing calls and conferences to continue<br />
(gracefully shut down)<br />
1 Go to Device > MCUs.<br />
2 In the MCUs list, select the MCU of interest.<br />
3 In the Commands list, select Busy Out.<br />
4 When asked to confirm that you want to busy out the selected MCU, click<br />
Yes.<br />
To start using an MCU again<br />
1 Go to Device > MCUs.<br />
2 In the MCUs list, select the out-of-service MCU of interest.<br />
3 In the Commands list, select Start Using.<br />
<strong>Polycom</strong>, Inc. 7–5