Polycom DMA 7000 System Operations Guide

Licenses
The following table describes the fields in the Licenses screen.
Table 8-6 Fields in the Licenses screen
Field Description
Active License
Licensed number of
MCUs
Server Settings
To update the system’s licenses:
1 Go to System Setup > Server Settings > Licenses.
2 Enter the new activation key for each server in its Activation key field.
Each Activation key field is labeled with a serial number. Make sure the
activation key you enter is the right one for that serial number. If a server
ever needs to be replaced, Polycom will provide a new activation key to
match the replacement’s serial number.
3 Click Update.
A dialog box informs you that the licenses have been updated.
4 Click OK.
The maximum number of MCUs that the Polycom DMA
system can use as conferencing resources.
Licensed MCU types The types of MCUs that the Polycom DMA system can
use as conferencing resources.
Activation Keys
This section contains two sets of the fields below, one for each server in the cluster.
System serial number The serial number of the specified server.
Activation key The activation key you received from Polycom for this
server. The key for each server must be the correct one
for that server’s serial number.
Polycom, Inc. 8–9