Polycom DMA 7000 System Operations Guide

DMA Operations Guide
8 Click OK.
Logging Configuration
The system processes the configuration and attempts to register with the
gatekeeper. The Signaling status and Status fields show the current state.
The following table describes the fields in the Logging Configuration screen.
Table 8-5 Fields in the Network screen
Field Description
Logging level Leave the default, Production, unless advised to
change it by Polycom support. Debug is useful for
troubleshooting. Verbose debug is not recommended
for production systems.
Rolling frequency If rolling the logs daily (the default) produces logs that
are too large, shorten the interval.
Retention period The number of days to keep log archives. Consider the
impact on disk space before lengthening this.
To configure logging
1 Go to System Setup > Server Settings > Logging Configuration.
2 Change Rolling frequency and Retention period as desired.
3 If requested to do so by Polycom support, change Logging level.
4 Click Update.
A dialog box informs you that the configuration has been updated.
5 Click OK.
8–8 Polycom, Inc.