07.08.2013 Views

PowerFlex 755 Install Manual.pdf

PowerFlex 755 Install Manual.pdf

PowerFlex 755 Install Manual.pdf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

10<br />

Step 2 Mount the Drive<br />

Operating Conditions and Temperatures<br />

Important: IP00, IP20, and NEMA/UL Open Type <strong>PowerFlex</strong> 750-Series<br />

drives must be mounted in a clean, dry location. Contaminants<br />

such as oils, corrosive vapors and abrasive debris must be kept<br />

out of the enclosure. These enclosures are intended for indoor<br />

use primarily to provide a degree of protection against contact<br />

with enclosed equipment. These enclosures offer no protection<br />

against airborne contaminants. Refer to Table 6 and Table 7 for<br />

an explanation of enclosure options.<br />

<strong>PowerFlex</strong> 750-Series drives are designed to operate at the following air<br />

temperatures without derating.<br />

Table 2 Acceptable Surrounding Air Temperature<br />

Enclosure Rating Temperature Range Drive<br />

IP20, NEMA/UL Open Type 0…50 °C (32…122 °F) Frames 2…5, All Ratings<br />

IP00, NEMA/UL Open Type 0…50 °C (32…122 °F) Frames 6…7, All Ratings<br />

IP20, NEMA/UL Type 1 (with Debris Hood) 0…40 °C (32…104 °F) Frames 2…5, All Ratings<br />

IP20, NEMA/UL Type 1 (with Debris Label) 0…40 °C (32…104 °F) Frames 6…7, All Ratings<br />

Flange Mount -<br />

Front:<br />

IP20, NEMA/UL Open Type<br />

IP00, NEMA/UL Open Type<br />

Back/Heat Sink:<br />

IP66, NEMA/UL Type 4X<br />

0…50 °C (32…122 °F)<br />

0…50 °C (32…122 °F)<br />

0…40 °C (32…104 °F)<br />

<strong>PowerFlex</strong> 750-Series <strong>Install</strong>ation Instructions – Publication 750-IN001C-EN-P – September 2009<br />

Frames 2…5, All Ratings<br />

Frames 6…7, All Ratings<br />

All Frames, All Ratings<br />

Stand-alone/Wall Mount -<br />

IP54, NEMA/UL Type 12 0…40 °C (32…104 °F) All Frames, All Ratings<br />

Table 3 400 Volt Ratings - Watts Loss<br />

Frame (1)<br />

ND kW External Watts Internal Watts Total Watts<br />

2 0.75 16 55 71<br />

1.5 26 57 83<br />

2.2 39 58 97<br />

4.0 75 64 139<br />

5.5 108 70 178<br />

7.5 161 80 241<br />

11 225 86 311<br />

3 15 300 103 403<br />

18.5 362 115 477<br />

22 505 126 631<br />

4 30 487 130 617<br />

37 615 147 762<br />

5 45 705 162 867<br />

55 928 201 1129<br />

6 75 1239 319 1558<br />

90 1381 300 1681<br />

110 1893 381 2274<br />

132 2449 502 2951<br />

7 160 2566 461 3027<br />

200 3322 586 3908<br />

250 3922 743 4665<br />

(1) Enclosure codes F and N only.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!