PowerFlex 755 Install Manual.pdf

More documents

Recommendations

Info

34 IP54, NEMA/UL Type 12 Frame 6 and 7 Lifting Points – 4 Places PowerFlex 750-Series Installation Instructions – Publication 750-IN001C-EN-P – September 2009
Accessing the Terminals Opening the Cover Figure 21 IP20, NEMA/UL Open Type, Frames 2…5 Figure 22 IP54, NEMA/UL Type 12, Frames 2…5 When cover is replaced: 2x: M4 X 0.7 Recommended torque (screws and nuts) = 0.68 N m (6.0 lb in) Recommended screwdriver = 6.4 mm (0.25 in.) flat or T20 Hexalobular Recommended hex socket = 7 mm PowerFlex 750-Series Installation Instructions – Publication 750-IN001C-EN-P – September 2009 35
Page 1 and 2: Installation Instructions PowerFlex
Page 3 and 4: Table of Contents Catalog Number Ex
Page 5 and 6: Step 1 Read the General Precautions
Page 7 and 8: PowerFlex 750-Series drives generat
Page 9 and 10: Drive Frame Catalog Number Frame 2
Page 11 and 12: Table 4 480 Volt Ratings - Watts Lo
Page 13 and 14: Table 7 Drive Enclosure Ratings Enc
Page 15 and 16: Figure 2 IP20, NEMA/UL Open Type Fr
Page 17 and 18: Figure 4 NEMA/UL Type 1 Frames 2…
Page 19 and 20: Figure 6 IP00, NEMA/UL Open Type Fr
Page 21 and 22: 1271.0 (50.04) 1221.0 (48.07) 881.8
Page 23 and 24: Figure 10 IP54, NEMA/UL Type 12 Fra
Page 25 and 26: Figure 12 IP54, NEMA/UL Type 12, Fr
Page 27 and 28: 495.5 (19.51) 457.8 (18.02) Figure
Page 29 and 30: 591.50 (23.287) 550.75 (21.683) 465
Page 31 and 32: 875.0 (34.45) 812.0 (31.97) 784.0 (
Page 33: IP00, NEMA/UL Open Type Frame 6 Lif
Page 37 and 38: Step 3 Wire the Drive Special Consi
Page 39 and 40: Voltage Tolerance Nominal Line Nomi
Page 41 and 42: Terminal Block Specifications Table
Page 43 and 44: ➎ ➍ ➌ ➊ ➋ Frame 6 Figure
Page 45 and 46: Common Bus Power Wiring Power Termi
Page 47 and 48: Common Bus Power Terminal Blocks Fr
Page 49 and 50: Using 750-Series Drives with Regen
Page 51 and 52: Table 19 400 Volt AC Input Protecti
Page 53 and 54: Drive Power Jumper Configuration Po
Page 55 and 56: Power Jumper Screw Removal and Stor
Page 57 and 58: Figure 34 Frame 7 Jumper Wire Locat
Page 59 and 60: Access Drive Control Pod 1. Remove
Page 61 and 62: PowerFlex 753 Main Control Board
Page 63 and 64: PowerFlex 755 Main Control Board
Page 65 and 66: Safety Enable Circuitry The drive s
Page 67 and 68: I/O Module 20-750-2262C-2R 20-750-2
Page 69 and 70: I/O Wiring Examples 51 Anlg In0 Hi
Page 71 and 72: Input/Output Connection Example Req
Page 73 and 74: Input/Output Connection Example Req
Page 75 and 76: Safe Torque Off Option Module 20-75
Page 77 and 78: Table 38 Safe Speed Monitor Paramet
Page 79 and 80: I/O Connection Example Encoder Sign
Page 81 and 82: Table 46 Dual Incremental Encoder P
Page 83 and 84: Table 49 Universal Feedback Increme
Page 85 and 86:
Auxiliary Power Supply Option Modul
Page 87 and 88:
ControlNet Option Module For comple
Page 89 and 90:
Step 5 Start-Up Check List Prepare
Page 91 and 92:
Navigate to Start-Up Menu Using the
Page 93 and 94:
Soft Keys Up to five dynamic soft k
Page 95 and 96:
Ports and Devices Drive Device Port
Page 97 and 98:
Status Indicators PowerFlex 753 Pow
Page 99 and 100:
Event Fault Configuration Auto No.
Page 101 and 102:
Event Fault Configuration No. Fault
Page 103 and 104:
Event Fault Configuration Auto No.
Page 105 and 106:
Common Symptoms and Corrective Acti
Page 107 and 108:
Drive (Port 0) Parameter List Numbe
Page 109 and 110:
Number Parameter Name Group 315 SLA
Page 111 and 112:
611 TrmPct RefA AnLo Speed Trim 612
Page 113 and 114:
944 Drive Temp C Status 945 At Limi
Page 115 and 116:
Notes: PowerFlex 750-Series Install
show all

PowerFlex 755 Install Manual.pdf

Create successful ePaper yourself

Delete template?

Save as template?