PowerFlex 755 Install Manual.pdf

6
CE Conformity
Compliance with the Low Voltage Directive and Electromagnetic
Compatibility Directive has been demonstrated using harmonized European
Norm (EN) standards published in the Official Journal of the European
Communities. PowerFlex 750-Series drives comply with the EN standards
listed below when installed according to this PowerFlex 750-Series AC
Drive Installation Instructions and the PowerFlex 750-Series AC Drive User
Manual.
CE Declarations of Conformity are available online at:
www.rockwellautomation.com/products/certification/
Low Voltage Directive (2006/95/EC)
EN 61800-5-1 Adjustable speed electrical power drive systems – Part
5-1: Safety requirements – Electrical, thermal and energy.
EMC Directive (2004/108/EC)
EN 61800-3 Adjustable speed electrical power drive systems – Part 3:
EMC product standard including specific test methods.
General Considerations
For CE compliance, drives must satisfy installation requirements related
to both EN 61800-5-1 and EN 61800-3 provided in this document.
PowerFlex 750-Series AC Drives comply with the EMC requirements of
EN 61800-3 when installed according to good EMC practices and the
instructions provided in this document. However, many factors can
influence the EMC compliance of an entire machine or installation, and
compliance of the drive itself does not ensure compliance of all
applications.
PowerFlex 750-Series drives are not intended to be used on public
low-voltage networks which supply domestic premises. Without
additional mitigation, radio frequency interference is expected if used on
such a network. The installer is responsible to take measures such as
supplementary line filters and enclosures to prevent interference, in
addition to the installation requirements of this document.
Requirements for supplementary mitigation related to specific high
frequency emission limits are provided in Table 1.
PowerFlex 750-Series Installation Instructions – Publication 750-IN001C-EN-P – September 2009