PowerFlex 755 Install Manual.pdf

88
20-COMM Carrier
20-750-20COMM
Enables use of some 20-COMM adapters with PowerFlex 750-Series drives.
See Table 60.
Refer to publication 750COM-IN001 for instructions on installing a
20-COMM adapter on the 20-COMM Carrier.
Table 60 20-COMM-* Network Adapter Compatibility with 750-Series Drives
Accesses Ports 2, 3, and 6 for Accesses Port 7
Adapter Type
I/O Connections (Implicit and
Explicit Messaging)
through 14
Devices
Supports Drive
Add On Profiles
Supports
Asian-Languages (5)
20-COMM-B BACnet MS/TP No
20-COMM-C ControlNet (Coax) ✓
(5) Chinese, Japanese, and Korean languages are supported at the time of publication.
(1)
✓ v3.001
(1) Controller must be capable of reading/writing 32-bit floating point (REAL) values.
(3)
✓
(3) Requires this adapter firmware version or higher.
(4)
✓ v3.001
(4) Requires firmware version v1.05 or higher of the drive Add On Profiles for RSLogix 5000 version v16 or higher.
(3)
20-COMM-D DeviceNet ✓ v2.005 (3)
No
20-COMM-E EtherNet/IP ✓ v4.001 (3) ✓ (4) ✓ v4.001 (3)
20-COMM-H RS-485 HVAC ✓ (2)
No
20-COMM-I Interbus ✓
(2) Only works in the Modbus RTU mode.
(1)
20-COMM-K CANopen
20-COMM-L LonWorks No
20-COMM-M Modbus/TCP ✓ (1)
✓ v2.001 (3)
No ✓ v2.001 (3)
20-COMM-P Profibus DP No
20-COMM-Q ControlNet (Fiber) ✓ v3.001 (3) ✓ (4) ✓ v3.001 (3)
20-COMM-R Remote I/O
20-COMM-S RS-485 DF1
No
PowerFlex 750-Series Installation Instructions – Publication 750-IN001C-EN-P – September 2009