DM-4800 OWNER'S MANUAL - zZounds.com - Tascam
DM-4800 OWNER'S MANUAL - zZounds.com - Tascam
DM-4800 OWNER'S MANUAL - zZounds.com - Tascam
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9 – Specifications : Messages and troubleshooting<br />
Action Message Meaning<br />
✔<br />
Clock Check Results<br />
Current Fs: 48kHz<br />
Sources<br />
Word : 44.1kHz0.0%<br />
Digi IN 1 : Out of Range<br />
Digi IN 2 : Fs convert On<br />
TDIF 1 : 44.1kHz0.0%<br />
TDIF 2 : 44.1kHz0.0%<br />
TDIF 3 : Unusable<br />
ADAT : 44.1kHz+1.0%<br />
SLOT 1 : 48kHz+0.2%<br />
SLOT 2 : Unusable<br />
Press ENTER to continue.<br />
✖ Clock Info: Digital In1<br />
C-bit : Illegal data.<br />
Press ENTER to continue.<br />
✖ Clock Info: Digital In1<br />
Fs mode : Not indicated<br />
Check D-IN <strong>MANUAL</strong> SETUP<br />
Press ENTER to continue.<br />
✔<br />
Clock Info: INTERNAL<br />
Fs: 44.1kHz<br />
Press ENTER to confirm,<br />
or a cursor key to cancel.<br />
✖ Clock Info: WORD<br />
New clock source is out of range.<br />
Master clock is unchaged.<br />
Press ENTER to continue.<br />
✖ Clock Info: WORD<br />
No signal<br />
Press ENTER to continue.<br />
✔<br />
✖<br />
✔<br />
ClockInfo: CASCADE<br />
Fs: fff kHz<br />
Press ENTER to confirm,<br />
or a cursor key to cancel.<br />
ClockInfo: CASCADE<br />
No signal<br />
Press ENTER to continue.<br />
126 TASCAM <strong>DM</strong>-<strong>4800</strong> User’s Manual<br />
Results of performing a word sync check.<br />
Shown when badly-formed digital audio is received at one of the DIGITAL INs.<br />
An attempt is made to use a clock source, but the sampling frequency cannot be<br />
determined.<br />
A valid clock source has been selected.<br />
A clock source has been changed, but the new clock is out of the permissible range.<br />
A clock source has been selected, but no signal is present.<br />
Informational message on slave about new cascade clock setting.<br />
If the clock is meant to be the cascade clock, but no valid clock signal is found, this<br />
message appears.<br />
COMP/EXP Library BANK a-bbb<br />
Name : TASCAM DATA<br />
Create data: DEC/15/2004<br />
20: 35: 45<br />
Project Name: PROJECT ORCA<br />
Project FS: 44.1kHz<br />
Press ENTER to continue.<br />
Information about a library entry (<strong>com</strong>pressor/expander).<br />
✔ COMP/EXP Library Preset a-bbb<br />
Name : TASCAM DATA<br />
Press ENTER to continue.<br />
Information about a library preset entry (<strong>com</strong>pressor/expander).<br />
● COMP/EXP Library<br />
Bank a-bbb recalled.<br />
A library entry has been recalled (<strong>com</strong>pressor/expander).<br />
✖ COMP/EXP Library<br />
Preset 1-bbb is Read-only!<br />
An attempt has been made to store to a protected library entry (<strong>com</strong>pressor/expander).<br />
● COMP/EXP Library<br />
Preset 1-bbb recalled.<br />
A library preset entry has been recalled (<strong>com</strong>pressor/expander).<br />
● Completed. The selected operation (e.g. format or creation of project) has been <strong>com</strong>pleted<br />
successfully.<br />
● Completed. An automation operation has been successfully <strong>com</strong>pleted.<br />
Table 9.1: Popup messages (continued)
Change language