DM-4800 OWNER'S MANUAL - zZounds.com - Tascam

1 – Introduction : Before you start
Before you start
The DM-4800 organizes your settings in projects.
Projects include snapshot data, effect settings,
dynamics processing and EQ settings, as well as
automation data, and are stored on the CF card.
Until you create your first project, you cannot store
your own settings.
Special notes for touch-sensitive faders
The usual rules regarding precision electronic equipment
naturally apply to the DM-4800. In addition,
note the following that apply to the touch-sensitive
faders:
Copyright, etc.
Windows and Windows XP are trademarks of
Microsoft Corporation.
Macintosh, MacOS, MacOS X and FireWire are
trademarks of Apple Computer.
14 TASCAM DM-4800 User’s Manual
TIP
Create a project before you first start work with the
DM-4800, so that you can make full use of the library
and automation functions.
Details of how to create and manage projects are provided
in “About projects and libraries” on page 34.
• The faders need a human finger to operate their
touch-sensitivity. Do not use a pencil, ruler, etc. to
operate them. Even using your fingernails may not
activate the touch-sensitivity.
• The humidity and temperature of your environment
affects the touch-sensitivity of the faders. Under
normal working conditions you should experience
no issues. However, extremes of temperature and/
or humidity may sometimes cause operational
problems.
HUI and Mackie CONTROL are trademarks of
LOUD Technologies Inc.
All other trademarks are the property of their respective
holders.