19.08.2013 Views

DM-4800 OWNER'S MANUAL - zZounds.com - Tascam

DM-4800 OWNER'S MANUAL - zZounds.com - Tascam

DM-4800 OWNER'S MANUAL - zZounds.com - Tascam

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Output gain (OUTGAIN), controlled by the POD 4<br />

knob on the last row (grayed out if the auto make-up<br />

above is on). Variable from -20dB to +20dB in 1 dB<br />

steps. Not shown if the processor is being used as an<br />

expander.<br />

Library jump buttons There are two such onscreen<br />

library jump buttons on channels 1 through 48<br />

(gate and <strong>com</strong>pressor/expander). Other (master)<br />

Preset dynamics library entries<br />

The following preset entries are provided either to be<br />

used “as-is”, or to be used as templates or starting<br />

points for experimentation.<br />

These library entries are read-only (marked with an<br />

inverse R on the display), and may not be overwritten.<br />

However, it is possible to load the entries, edit the<br />

parameters, and then store them to a different library<br />

entry.<br />

5 – Channel modules : Dynamics processors<br />

modules only have the <strong>com</strong>pressor/expander jump<br />

keys.<br />

These buttons are labeled GATE... LIB→ and C/E... LIB→<br />

respectively.<br />

When pressed, the appropriate library screen is<br />

brought up, where the current settings can be stored<br />

for future use, or preset or previously-stored settings<br />

can be recalled for use in the project.<br />

As always, there are no hard and fast rules as to what<br />

“works”. Feel free to use the settings in a variety of<br />

contexts and change them as seems appropriate to<br />

you.<br />

Compressor/expander library entries Use<br />

these settings for the <strong>com</strong>pressor/expander either “as<br />

is” or edit them to your needs and store them as part<br />

of the project.<br />

Program<br />

Number<br />

Name Comment<br />

000 Sample Snare For use with snare drums<br />

001 Slap Bass For use with slap-type bass inputs<br />

002 Electric Bass For use with electric bass guitar<br />

003 Wood Bass For use with upright bass (double-bass or contra-bass)<br />

004 Synth. Bass 1 For use with synthesized bass lines<br />

005 Synth. Bass 2 For use with synthesized bass lines<br />

006 Acoustic Guitar To be used with acoustic guitars (nylon or steel-strung)<br />

007 Electric Guitar 1 For use with electric guitars<br />

008 Electric Guitar 2 For use with electric guitars<br />

009 Electric Guitar 3 For use with electric guitars<br />

010 Brass Effective with brass (horn) sections, etc.<br />

011 Vocal 1 Use with vocal lines<br />

012 Vocal 2 Use with vocal lines<br />

013 Total Comp 1 Overall <strong>com</strong>pressor setting<br />

014 Total Comp 2 Overall <strong>com</strong>pressor setting<br />

015 Total Comp 3 Overall <strong>com</strong>pressor setting<br />

016 Post Pro.1 Useful in post-production environments<br />

017 Post Pro.2 Useful in post-production environments<br />

018 Narration For the spoken word<br />

019 Expander1 Expander setting<br />

020 Expander2 Another expander setting<br />

021 Slow Attack An expander with a slow attack<br />

022 E Guitar Clean1 Expander setting suitable for electric guitar<br />

Table 5.4: Compressor/Expander preset library entries<br />

TASCAM <strong>DM</strong>-<strong>4800</strong> User’s Manual 77

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!