J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
148 CHAPTER 6 Flash download and flash breakpoints<br />
on page 107. Now you can start the debug session. If you run this project for the<br />
first time a settings file is created in which the configuration of J-<strong>Link</strong> ARM FlashDL<br />
and FlashBPs is saved. This settings file is created for every project configuration<br />
(for example Debug_RAM, Debug_FLASH), so you can save different J-<strong>Link</strong> ARM<br />
FlashDL and FlashBP configurations for different project configurations. When the<br />
debug session starts, you should see the selected target in the Device tab of the J-<br />
<strong>Link</strong> status window. When the debug session is running you can modify the settings<br />
regarding J-<strong>Link</strong> ARM FlashDL and FlashBPs, in the Settings tab and save them to<br />
the settings file.<br />
Currently changes in this tab will take effect next time the debug session is started.<br />
6.4.2 Keil MDK<br />
To use the J-<strong>Link</strong> ARM FlashDL and FlashBP features with the Keil MDK is quite simple:<br />
First, choose the device in the project settings if not already done. The device settings<br />
can be found at Project->Options for Target->Device.<br />
J-<strong>Link</strong> / J-<strong>Trace</strong> (<strong>UM08001</strong>) © 2004-2010 SEGGER Microcontroller GmbH & Co. KG
Change language