J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.3.8 Flasher ARM<br />
Flasher ARM is a programming tool for microcontrollers with onchip<br />
or external Flash memory and ARM core. Flasher ARM is<br />
designed for programming flash targets with the J-Flash software<br />
or stand-alone. In addition to that Flasher ARM has all of<br />
the J-<strong>Link</strong> functionality. For more information about Flasher<br />
ARM, please refer to UM08007, Flasher ARM <strong>User</strong>’s <strong>Guide</strong>.<br />
1.3.8.1 Specifications<br />
The following table gives an overview about the specifications<br />
(general, mechanical, electrical) for Flasher ARM.<br />
General<br />
For a complete list of all operating sys-<br />
Supported OS<br />
tems which are supported, please refer<br />
to Supported OS on page 19.<br />
Mechanical<br />
USB interface USB 2.0, full speed<br />
Target interface JTAG/SWD 20-pin<br />
JTAG Interface, Electrical<br />
Power supply<br />
USB powered<br />
Max. 50mA + Target Supply current.<br />
Target interface voltage (VIF ) 1.2V ... 5V<br />
Target supply voltage 4.5V ... 5V (if powered with 5V on USB)<br />
Target supply current Max. 300mA<br />
For the whole target voltage range (1.8V
Change language