J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.2.2 SWO Analyzer<br />
SWO Analyzer (SWOAnalyzer.exe) is a tool that analyzes SWO output. Status and<br />
summary of the analysis are output to standard out, the details of the analysis are<br />
stored in a file.<br />
Usage<br />
SWOAnalyzer.exe <br />
This can be achieved by simply dragging the SWO output file created by the J-<strong>Link</strong><br />
DLL onto the executable.<br />
Creating an SWO output file<br />
In order to create the SWO output file, which is th input file for the SWO Analyzer,<br />
the J-<strong>Link</strong> config file needs to be modified.<br />
It should contain the following lines:<br />
[SWO]<br />
SWOLogFile="C:\TestSWO.dat"<br />
4.2.3 J-<strong>Link</strong> STR91x Commander (Command line tool)<br />
J-<strong>Link</strong> STR91x Commander (J<strong>Link</strong>STR91x.exe) is a tool that can be used to configure<br />
STR91x cores. It permits some STR9 specific commands like:<br />
• Set the configuration register to boot from bank 0 or 1<br />
• Erase flash sectors<br />
• Read and write the OTP sector of the flash<br />
• Write-protect single flash sectors by setting the sector protection bits<br />
• Prevent flash from communicate via JTAG by setting the security bit<br />
J-<strong>Link</strong> / J-<strong>Trace</strong> (<strong>UM08001</strong>) © 2004-2010 SEGGER Microcontroller GmbH & Co. KG<br />
73
Change language