J-Link / J-Trace User Guide (UM08001) - Microcontrollers

2.6 J-Link OEM versions
There are several different OEM versions of J-Link on the market. The OEM versions
look different, but use basically identical hardware. Some of these OEM versions are
limited in speed, some of these can only be used with certain chips and some of
these have certain add-on features enabled, which normally requires license. In any
case, it should be possible to use the J-Link software with these OEM versions. However,
proper function cannot be guaranteed for OEM versions. SEGGER Microcontroller
does not support OEM versions; support is provided by the respective OEM.
2.6.1 Analog Devices: mIDASLink
mIDASLink is an OEM version of J-Link, sold by Analog Devices.
Limitations
mIDASLink works with Analog Devices chips only. This limitation
can NOT be lifted; if you would like to use J-Link with a device
from an other manufacturer, you need to buy a separate J-Link.
Licenses
Licenses for RDI, J-Link ARM FlashDL and FlashBP are included.
Other licenses can be added.
2.6.2 Atmel: SAM-ICE
SAM-ICE is an OEM version of J-Link, sold by Atmel.
Limitations
SAM-ICE works with Atmel devices only. This limitation can NOT
be lifted; if you would like to use J-Link with a device from an
other manufacturer, you need to buy a separate J-Link.
Licenses
Licenses for RDI and GDB Server are included. Other licenses can
be added.
J-Link / J-Trace (UM08001) © 2004-2010 SEGGER Microcontroller GmbH & Co. KG
49