J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
J-Link / J-Trace User Guide (UM08001) - Microcontrollers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.2.8 J-<strong>Link</strong> RDI (Remote Debug Interface)<br />
The J-<strong>Link</strong> RDI software is an remote debug interface for J-<strong>Link</strong>. It makes it possible<br />
to use J-<strong>Link</strong> with any RDI compliant debugger. The main part of the software is an<br />
RDI-compliant DLL, which needs to be selected in the debugger. There are two additional<br />
features available which build on the RDI software foundation. Each additional<br />
features requires an RDI license in addition to its own license. Evaluation licenses are<br />
available free of charge. For further information go to our website or contact us<br />
directly.<br />
Note: The RDI software (as well as flash breakpoints and flash downloads) do<br />
not require a license if the target device is an LPC2xxx. In this case the software verifies<br />
that the target device is actually an LPC 2xxx and have a device-based license.<br />
4.2.8.1 Flash download and flash breakpoints<br />
Flash download and flash breakpoints are supported by J-<strong>Link</strong> RDI. For more information<br />
about flash download and flash breakpoints, please refer to J-<strong>Link</strong> RDI <strong>User</strong>’s<br />
<strong>Guide</strong> (UM08004), chapter Flash download and chapter Breakpoints in flash memory.<br />
J-<strong>Link</strong> / J-<strong>Trace</strong> (<strong>UM08001</strong>) © 2004-2010 SEGGER Microcontroller GmbH & Co. KG<br />
79
Change language