The System Manual of SOL-20 - History of Computers

Sol-PC
PROCESSOR TECHNOLOGY CORPORATION
SINGLE BOARD TERMINAL COMPUTER TM
SECTION III
( ) Step 45. Using four 4-40 x 1/4binder head screws, lockwashers
-- and hex nuts, install two brackets (Sol-1040) for personality
module in area to right of J5. Position brackets over the
mounting holes as shown in Figure 3-11. Insert screws from
front (component) side of board, place lockwasher on each
screw on back (solder) side of board, start nuts and tighten.
Figure 3-10. CPU Functional Test No. 2 display,
6575 character generator (U25).
6574 displays: 9 090 9oetc.
, Bracket (Sol-1040) ,
Guide ( SAE1250F)----j
-40 x &-
Screw
Sol-P'CB 7.
Side
of Board
Figure 3-11. Personality module bracket/guide
installation (Viewed from right
end of Sol-PCB).
III-31