Series 360, Granville-Phillips, Stabil-Ion, Ionization, Vacuum ...

2 Initial Setup Procedures
2.1.5.1 Selecting the Byte Format
Dip switches 6-8 may be used to set the baud rate. The settings are:
Table 2-5
Baud Rate.
X
X
OFF
ON
S6 S7 S8 Baud Rate
On On On 9600*
On On Off 4800
On Off On 2400
On Off Off 1200
Off On On 600
Off On Off 300
Off Off On 150
Off Off Off 75
* factory setting
Figure 2-14
Partial Top View of Process Control Module.
2.1.5.1.1 Character Framing
Switches 3-5 control the number of characters, polarity, and number of stop bits:
Table 2-6 Character Framing.
S3 S4 S5
Character
Bits Parity Stop Bits
X
X
OFF
ON
On On On 8 None 2
On On Off 8 Even 2
On Off On 8 Odd 1
On* Off* Off* 8* None* 1*
Off On On 7 Even 1
Off On Off 7 Odd 1
Off Off On 7 Even 2
Off Off Off 7 Odd 2
* factory setting
Figure 2-15
Partial Top View of RS-232 Module.
2-10
Series 360 Stabil-Ion December, 2001