Series 360, Granville-Phillips, Stabil-Ion, Ionization, Vacuum ...
Series 360, Granville-Phillips, Stabil-Ion, Ionization, Vacuum ...
Series 360, Granville-Phillips, Stabil-Ion, Ionization, Vacuum ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 Preparing the <strong>Stabil</strong>-<strong>Ion</strong> System for Operation<br />
GTL<br />
Definition: Send control back to the electrometer front panel switches.<br />
Modifiers: none<br />
Response: OK if command accepted, or INVALID if rejected.<br />
LLO<br />
Definition: Local lockout of the electrometer front panel gauge control switches.<br />
Modifiers: none<br />
Response: OK if command accepted, or INVALID if rejected.<br />
Error Messages<br />
If an error is found in the incoming message, the following messages will be returned in place of the<br />
normal response, and if the SRQ mode is used, bit 5 in the serial poll response byte will be set.<br />
OVERRUN ERROR – Returned if the incoming message overflows <strong>360</strong>'s buffer.<br />
SYNTAX ERROR – Returned if the message fails to parse as a valid <strong>360</strong> command.<br />
<strong>Series</strong> <strong>360</strong> <strong>Stabil</strong>-<strong>Ion</strong> December, 2001<br />
4-34
Change language