Using JMP - SAS

Chapter 5 Set Column Properties 161
Standardize Attributes and Properties across Columns
Figure 5.5 Standardizing Attributes Across Columns
By default, the items within the Standardize Attributes panel are dimmed. To access an item:
3. Click the Attributes button and select the items to be duplicated across columns.
Note: The Input Format item is applicable only for the Date, Time, and Duration formats.
4. To change the values of any of the attributes, use the menus in the Standardize Attributes panel.
5. Click Column Properties in the Standardize Properties area and set up the properties that you want the
other columns to have.
6. Click in the data table.
7. Highlight the columns in the data table to which you want to apply the attributes and properties.
8. Go back into the Standardize Columns Attributes window and click Apply. The attributes and
properties apply to all the selected columns in the data table. You can view your results.
9. Click OK.
Tip: You can select all of the columns that you want to standardize and then select Cols > Standardize
Attributes. The first selected column (left-most) is used to set up the window’s values. Then you might skip
steps 6 and 7, because you have already selected the columns.
Delete Properties
To delete the same properties across multiple columns:
1. Select the column containing the attributes or properties that you want to delete.
2. Select Cols > Standardize Attributes.