Using JMP - SAS

354 Personalize JMP Chapter 11
Personalize Toolbars and Menus on Windows
– To paste a button, right-click the button before or after which you want the new button, and select
Paste. If you selected the first button on the toolbar, select the location of the button. Otherwise,
the button is pasted below the selected button.
5. Modify the item.
6. Click Save to save your changes.
See “Create Toolbars” on page 345 and “Create Menu Items and Toolbar Buttons” on page 348 for details
about modifying the items.
Rearrange Custom Menus, Menu Items, and Buttons
On Windows, you can rearrange the order of menus, menu items, and buttons that you create. For example,
under the File > New menu, you could move your custom menu before the Data Table command.
In the item’s General properties, the Source determines whether you can move the item. You can move items
if the Source is Custom Item. Built-in items cannot be moved. Items that are defined in other customization
sets can be moved only in that customization set. See “Change Customization Sets” on page 344 for details.
Note: The right-click menu has options for cutting and pasting items. To cut an item, you can also hold
down the CTRL key and press X, or hold down the SHIFT key and press DELETE. To paste, hold down
the CTRL key and press V, or hold down the SHIFT key and press INSERT.
To rearrange custom menus and menu items:
1. Select View > Customize > Menus and Toolbars.
The Main Menu list appears on the left.
2. Do the following:
– Select the item that you want to move.
– Verify that the Source is Custom Item.
– If the Source is All Users or JMP Add-In, select the specified customization set and verify that the
Source is Custom Item.
3. Right-click the custom menu or menu item that you want to move and select Cut.
4. Right-click the new location of the cut item and select Paste.
One of the following occurs:
– A list appears with the possible locations of the cut item. This occurs when you select a menu (such
as File or New) or the first item in a menu (such as Data Table in the File > New menu).
– The cut menu item appears below the selected menu item. Skip to step 6.
5. Select the location of the cut item by doing one of the following:
– To paste the cut item before the selected item, select Paste before.
– To paste the cut item after the selected item, select Paste after.
– To paste the cut item inside the selected menu, select Paste into. (Only available when you select a
menu as the new location.)