GR-DVL9600 GR-DVL9500 - JVC

10 EN
Select Dial
MENU Button
Display
4REC MODE SP
WIDE MODE OFF
ZOOM
40X
DIS
OFF
GAIN UP AGC
FLASH
AUTO
TO DATE / TIME MENU
TO SYSTEM MENU
END – – – – –6– – – – –
4REC MODE SP
WIDE MODE OFF
ZOOM
40X
DIS
OFF
GAIN UP AGC
FLASH
AUTO
TO DATE / TIME MENU
TO SYSTEM MENU
END – – – – –6– – – – –
PLAYOFF
5S
Power Switch
Power lamp
Lock Button
Recording Menu
GETTING STARTED (cont.)
Recording Mode Setting
Set depending on your preference.
1
SELECT OPERATION MODE
Set the Power Switch to “ ”, “5S” or “ ” while
pressing down the Lock Button located on the switch,
and open the LCD monitor fully or pull out the
viewfinder fully.
•The power lamp comes on and the camcorder is
turned on.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
SET RECORDING MODE
First move the highlight bar to “REC MODE” by
rotating the Select Dial. Press the Select Dial and the
parameter “SP” or “LP” is highlighted. Select “SP” or
“LP” by rotating the Select Dial. Press the Select Dial
twice to exit from the Recording Menu.
•Insert Editing or Audio Dubbing is impossible on a
tape recorded in the LP mode.
•“LP” (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
● If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
Recording mode indicator
SP SP LP
– – – – –6– – – – –