GR-DVL9600 GR-DVL9500 - JVC

Select Dial
White paper
Power lamp
PLAYOFF
5S
Lock Button
Power Switch
Manual White Balance Operation
EN41
If the camera is operating in Manual mode “ ” or “ ”,
perform a Manual White Balance when shooting under
various types of lighting.
1
SELECT OPERATION MODE
Follow steps 1 through 4 of the white balance
adjustment ( pg. 40), select “ MAN.”.
2
SET MANUAL WHITE BALANCE
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that the
white paper fills the screen.
3
ENTER SETTING
Press the Select Dial until the
begins blinking.
•When the setting is completed, the stops
blinking.
4
EXIT MANUAL WHITE BALANCE
ADJUSTMENT
Press the Select Dial. The indication “W.BAL.”
changes to “MANUAL” and only the Manual White
Balance indicator is displayed.
Display
FOCUS AUTO
EXPOSURE AUTO
4W. BALANCE AUTO
FADER OFF
/ WIPE
P. AE
OFF
/ EFFECT
FLASH ADJ. 0
END
MANUAL
Manual Mode Item
Menu
Manual White
Balance Adjustment
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour,
changing the tint. Red paper — deeper green; blue
paper — orange; yellow paper — deeper purple.
NOTES:
● In step 2, it may be difficult to focus on the white paper
in some circumstances. In such a case, adjust focus
manually ( pg. 37).
● A subject can be shot under various types of lighting
conditions indoors (natural, flourescent, candlelight,
etc.). Because the colour temperature is different
depending on the light source, the tint of the subject will
differ depending on the white balance settings. Use this
function for a more natural result.
● Once you adjust white balance during Manual White
Balance operation, the setting is retained even if the
power is turned off or the battery removed.